SUPPORT
CAP STRIP NUTPLATE
SUPPORT TAPE
SCREW
RUBBER SEAL
CAP STRIP
SHROUD
INBD
B
NUTPLATE SUPPORT RUBBER
SEAL LINING
CAP STRIP TAPE
FWD SHROUD
SCREW LINING
RUBBER RUBBER
CORK SEAL SEAL INSULATION
RUBBER A-A SEAL
SUPPORT
CAP STRIP
INBD
C
Aft Cargo Compartment (Forward Bulkhead) Lining Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-52-81
ALL ú ú 01 Page 402 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SUPPORT CEILING ANGLE
LINING
D-D
Aft Cargo Compartment (Forward Bulkhead) Lining Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-52-81
ALL ú ú 01 Page 403 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TASK 25-52-81-404-036
3. Install the Forward Bulkhead Lining for the Aft Cargo Compartment (Fig. 401)_________________________________________________________________
A. Consumable Materials
(1) Tape (Ref 20-30-51/201)
NOTE: Use one of these tapes:
____
(a)
G02101 Permacel - Glass cloth, flame resistant, P212HD
(b)
G01338 3M 367-FR
B. Access
(1) Location Zones
218 Aft Cargo Compartment
C. Procedure
S 214-013
(1)
Examine the rubber seals between the linings and the support angles (Views B-B and C-C, Fig. 401).
S 964-014
(2)
Replace the rubber seals if they are damaged.
S 824-015
(3)
Put the lining on the supports to align the mount holes.
(4)
Install the screws around the edges of the lining.
(5)
Install the cap strips where it is necessary.
(6)
Put the new tape on all of the seams, splices, and fasteners.
S 424-017
S 414-018
S 424-016
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-52-81
ALL ú ú 02 Page 404 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
CARGO COMPARTMENT INSULATION - REMOVAL/INSTALLATION
___________________________________________________
1. General_______
A. This procedure contains these tasks:
(1)
Removal of the insulation blanket in the cargo compartments.
(2)
Installation of the insulation blanket in the cargo compartments.
(3)
Removal of the nylon cord from the support structure.
(4)
Installation of the nylon cord on the support structure.
TASK 25-52-91-004-020
2. Remove the Insulation Blanket (Fig. 401)_____________________________
A. References
(1)
AMM 25-52-73/401, Cargo Compartment Sidewall Insulation
(2)
AMM 25-52-51/401, Cargo Compartment Deck Panels
B. Access
(1) Location Zone
208 Forward Cargo Compartment
218 Aft Cargo Compartment
C. Procedure
S 014-021
(1)
Do this task: "Remove the Sidewall Lining for the Cargo Compartment" (AMM 25-52-73/401).
S 014-004
(2)
Do this task: "Remove the Deck Panels for the Cargo Compartment" (AMM 25-52-51/401).
(3)
Remove the clips from the plastic studs (Fig. 401).
(4)
Release the glove fasteners (Fig. 401).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(140)
