25-61-35
ALL ú ú 08 Page 215 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TASK 25-61-35-202-037
8. Latch Cable Assembly Inspection
________________________________
A. General
(1) Airplanes with worn cable on the latch assembly of the escape slide can break and prevent the automatic deployment of the escape slide. If the escape slide does not deploy, the escape slide girt will twist and prevent the movement of the door to a fully opened position. With the door in this position, manual inflation of the escape slide is not possible. The girt of a non deployed escape slide will also prevent any exit through that door until the door is closed and armed girt bar is released.
B. Access
(1) Location Zone
105 Forward Entry Door
106 Forward Galley Service Door
110 Aft Entry Door
112 Aft Galley Door
C. Procedure
S 212-038
(1) Do a check of the cable assembly:
(a)
Lower the escape slide girt bar to get access to the cable assembly.
(b)
Check each escape slide assembly on the entry and service doors for worn or broken latch cables.
(c)
Replace the worn or broken latch cables.
NOTE: On airplanes that have a split ring make sure it is
____
soldered correctly.
(d) Make sure the part of the latch cable near the latch is behind the girt (Fig. 201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-61-35
ALL ú ú 07 Page 216 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TASK 25-61-35-002-013
9. Escape Slide Removal after Deployment_____________________________________
A. Access
(1)
Location Zone
105 Forward Entry Door
106 Forward Galley Service Door
110 Aft Entry Door
112 Aft Galley Service Door
(2)
Access Panel
4201L Forward Entry Door
4701R Forward Galley Door
4601L Aft Entry Door
4301R Aft Galley Door
B. Procedure
S 022-014
(1) Disconnect the escape slide from the airplane.
(a) Push the aspirator flapper door to deflate the escape slide until it is soft.
NOTE: Make sure the escape slide keeps its shape.
____
(b)
Attach the ends of a rope to each end of the girt bar, adjacent to the girt.
(c)
Disconnect the girt bar from the floor fittings.
NOTE: Release the tension in the girt to disconnect the
____
girt bar easily.
CAUTION:_______BE CAREFUL WHEN YOU LOWER THE ESCAPE SLIDE. THE ESCAPE SLIDE AND ITS COMPONENTS CAN BREAK IF THEY FALL.
CAUTION: MAKE SURE THE AREA BELOW THE SLIDE IS CLEAR BEFORE YOU
_______ LOWER THE SLIDE TO THE GROUND. OBJECTS BELOW THE SLIDE CAN CAUSE DAMAGE TO THE SLIDE AND ITS COMPONENTS.
(d)
Lower the escape slide to the ground.
NOTE:____Four persons are necessary to do this step. Two persons must lower the girt with the rope while two persons pull the other end of the slide away from the airplane.
(e)
Fully deflate the escape slide. 1) Attach a clamp to hold the flapper doors open.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-61-35
ALL ú ú 06 Page 217 ú Mar 12/00
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(152)