S 024-009
(4)
Lift the handles on the floor track attachment to the vertical position.
(a) Turn the handles through 90 degrees to release the divider from the track.
S 034-010
(5)
Move the bottom of the partition until the inboard support is clear from the decorative panel and the overhead bins.
(6)
Remove the divider.
S 024-011
TASK 25-24-41-404-033
2. Class Partition Installation (Fig. 401)____________________________
A. Access
(1) Location Zones
107 Forward Half of Cabin
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-24-41
ALL ú ú 03 Page 401 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
TOP SUPPORT AT STOWAGE BIN PSU EXTRUSION (2 LOCATIONS)
SEE A
OVERHEAD STOWAGE BINS CLASS DIVIDER PARTITION
FWD
SCREW OUTBOARD CLAMP ASSEMBLY
TOP SUPPORT AT A/C EXTRUSION (2 LOCATIONS)
SEE B
FLOOR TRACK ATTACHMENT (4 LOCATIONS)
SEE C
FLOOR
TRACK
A/C EXTRUSION
CLASS DIVIDER PARTITION
TOP SUPPORT AT A/C EXTRUSION B
PSU EXTRUSION
HOOK
PIN
CLASS DIVIDER PARTITION
INSTALL HOOK INTO EXTRUSION; INSTALL CLASS DIVIDER AND INSTALL PIN INTO HOOK
TOP SUPPORT AT STOWAGE BIN PSU EXTRUSION
A
CROSS PIN CLASS DIVIDER PARTITION
FLOOR TRACK FITTING
FLOOR TRACK
FLOOR TRACK ATTACHMENT C
Class Divider Partition Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-24-41
ALL ú ú 03 Page 402 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
B. Install Class Partition
S 434-034
(1) Install the hook on the PSU extrusion.
(a) Install the class divider and let the hook engage the class divider then install the pin.
S 824-035
(2)
Move the partition in the position to engage the support clamp assembly to the A/C extrusion.
S 424-037
(3)
Attach the support to A/C extrusion with a clamp, and tighten the screws.
S 424-038
(4)
Engage the partition track attachment with the floor track, and tighten.
S 424-039
(5)
Turn the handles on the floor track attachment and fold down to engage the index pins.
(6)
Install the curtain, if it is necessary.
S 414-040
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-24-41
ALL ú ú 03 Page 403 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
AFT CENTERLINE STOWAGE CLOSET - REMOVAL/INSTALLATION
____________________________________________________
1. General
_______
A. This procedure has these tasks:
(1)
The removal of the Stowage Closet
(2)
The installation of the Stowage Closet
B. You must disassemble the components to remove the centerline stowage closet.
TASK 25-24-81-004-001
2. Stowage Closet Removal (Fig. 401)
______________________
A. Access
(1) Location Zone
108 Aft Half of Galley
B. Procedure
S 024-002
(1)
Remove the screws from the door hinge to remove the door.
S 024-003
(2)
Remove the foot panel.
(a) Remove the internal fasteners at each end to remove the foot panel
S 024-004
(3) Remove the shelf and the top panel.
(a) Remove the fasteners from the support brackets to remove the shelf and the top panel.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(75)
