EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-25-12
ALL ú ú 04 Page 202 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500
MAINTENANCE MANUAL
ATTENDANT
SEAT
SEE A
FWD
VELCRO
FORWARD ENTRY AREA
UPPER SEAT
BOLT INERTIA BACK
WASHER REEL
(4 LOCATIONS
FOR SEAT BELTS)
HEADREST
BOLT
WASHER
(2 LOCATIONS
BEHIND SEAT
BACK)
LATCH
LOWER
SEAT BACK
SEAT PAN
ATTENDANT
SEAT FWD
BOLT STORAGE
WASHER COMPARTMENT ATTENDANT SEAT
(6 LOCATIONS IN DOOR (EXAMPLE)
LOWER COMPARTMENT) A
Cabin Attendant's Seat Installation
Figure 202
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-25-12
ALL ú ú 01 Page 203 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
K69851
A
737-300/400/500MAINTENANCE MANUAL
B. Procedure
S 022-030
(1) Remove the headrest. To remove it, pull on it. It is attached with hook and loop fasteners (Velcro).
(a) Remove the mounting bolts that attach the inertia reel bracket of the seat belt to the wall.
S 022-053
(2)
Open the storage compartment door below the seat and remove the mounting bolts.
S 012-054
(3)
Do these steps to open the lower seat back:
(a)
Open the seat pan a small distance.
(b)
Open the fabric flap that is between the lower seat back and the upper seat back. To open it, pull it away from the upper seat back. It is attached with hook and loop fasteners (Velcro).
(c)
Push the two latches on the lower seat back toward the center of the seat back.
(d)
Pull the seat back out and down.
S 022-055
(4)
Remove the mounting bolts that are behind the lower seat back.
S 022-056
(5)
Remove the seat.
TASK 25-25-12-402-010
4. Attendants' Seat Installation (Fig. 201)_____________________________
A. Access
(1) Location Zones
107 Forward Half of Cabin
108 Aft Half of Cabin
B. Install the Double Attendants' Seat
S 422-011
(1) Install the seat
(a)
Install the seat in its position and put it into the slide tracks.
(b)
Attach the link handle to the slide track with the screws or bolts and spacers.
(c)
Install the nut and the cotter pin if it is necessary.
(d)
Install the slide track stops.
S 432-012
(2) Install the backrest and the headrest.
(a) Install the backrest and the headrest in its position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-25-12
ALL ú ú 06 Page 204 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(b) Push the backrest and the headrest tightly against the partition. 1) Engage the velcro tape on the backrest and the headrest to
the velcro tape on the partition.
C. Install the Single Attendants' Seat.
S 422-016
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(78)
