(8)
Put the girt bar into the retaining clips.
S 862-031
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-61-35
ALL ú ú 09.1 Page 213 ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 212-032
(9) Make sure you can see the pressure gage in the inspection window.
TASK 25-61-35-202-009
6. Escape Slide Pack Inspection____________________________
A. Consumable Materials
(1) G00009 Compound, Corrosion Inhibitor, BMS 3-23.
B. Access
(1)
Location Zone
105 Forward Entry Door
106 Forward Galley Service Door
110 Aft Entry Door
112 Aft Galley Service Door
(2)
Access Panel
4201L Forward Entry Door
4701R Forward Galley Door
4601L Aft Entry Door
4301R Aft Galley Door
C. Procedure
S 212-044
(1) Examine the Escape Slide Pack.
(a)
Examine the escape slide girt for fraying.
(b)
Look for worn areas.
(c)
Repair or replace the slide assembly or the girt if you find damage that could cause the slide to operate incorrectly.
(d)
Make sure the fasterners that attach the escape slide assembly to the door are tight.
(e)
AFT ESCAPE SLIDES; Examine the girt bar. 1) Remove the girt bar from their retaining clips. 2) Remove the pins and collars to release the girt bar. 3) Make sure there is no corrosion on the girt bar.
(f)
FORWARD ESCAPE SLIDES; Examine the nylon sleeve. 1) Make sure the sleeve is in good condition. 2) If the nylon sleeve is bonded to the girt bar, make sure
the beads are completed at the two ends.
3) If the nylon sleeve beads are not correct, replace the nylon sleeve. a) Cut the sleeve off the girt bar. b) Make sure there is no corrosion on the girt bar. c) Apply corrosion preventive compound. d) Replace the nylon sleeve.
(g)
FORWARD ESCAPE SLIDES WITH A FRANGIBLE LINK; Make sure the strap assembly does not prevent the correct operation of the valve assembly.
(h)
Make sure there is no corrosion on the latch.
(i)
Make sure the latch operates correctly.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-61-35
ALL ú ú 07 Page 214 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TASK 25-61-35-202-011
7. Escape Slide Pack Check_______________________
A. General
(1) The pressure bottle gage on the escape slide has a temperature compensater.
B. Access
(1)
Location Zone
105 Forward Entry Door
106 Forward Galley Service Door
110 Aft Entry Door
112 Aft Galley Service Door
(2)
Access Panel
4201L Forward Entry Door
4701R Forward Galley Door
4601L Aft Entry Door
4301R Aft Galley Door
C. Procedure
S 212-012
(1) Do a check of the pressure gage (Fig. 203).
(a)
If the temperature of the inflation cylinder is constant for 2 hours or more, make sure the pressure gage needle is in the green band or not more than one needle width to the right of the green band.
(b)
If the temperature of the inflation cylinder is not constant for 2 hours, make sure the pressure gage needle is in the green band or not more than one-half green band width to the right or left of the the green band.
NOTE: It is best to do a check on the pressure gage when it
____ has been at a constant temperature for 2 hours. The green band moves more quickly than the pressure gage needle in response to a large temperature change. This can cause an incorrect pressure indication.
1) Do the pressure gage check again after 24 hours.
(c) For the initial installation of the escape slide assembly, make sure the gage needle aligns with the black line on the green band.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS(151)
