(4)
Remove the drip pan from beneath the oil cooler.
(5)
Set the LIGHT control switch 11LJ to the off position.
(6)
Close the APU access doors 315AL, 316AR (Ref. TASK 52-41-00-410-001).
(7)
Remove the access platform(s). Subtask 49-91-44-865-067
B.
Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1KD, 2KD
Subtask 49-91-44-860-054
C. Aircraft Maintenance Configuration
(1)
Pressurize the reservoirs of the hydraulic systems.
(Ref. TASK 29-14-00-614-002).
(2)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
(3)
Remove the warning notice(s).
PUMPS - OIL ((GTCP 36-300)) - MAINTENANCE PRACTICES
___________________________________________________ R **ON A/C 001-003, 051-099, 401-499,
TASK 49-91-45-200-002 Remove and discard Lube Filter Element (GTCP 36-300) WARNING : DO NOT TOUCH THE APU UNTIL IT IS SUFFICIENTLY COOL TO PREVENT BURNS
_______ WHEN YOU DO THE MAINTENANCE TASK(S).
WARNING : CUT, REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE
_______ LOCKWIRE CAN CUT OR BLIND YOU.
WARNING : DO NOT LET OIL STAY ON YOUR SKIN FOR A LONG TIME AS IT CAN CAUSE
_______ INJURY.
1.
Reason for the Job
__________________
Refer to the MPD TASK: 499141-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
No specific container 10 l (2.6416 USgal)
No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 03-002 GB DEF-STAN 91-101 LUBRICATING OIL TURBINE ENGINE SYNT BASE (Ref. 20-31-00)
Material No. 19-010 USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00) C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
1 O-ring 49-91-45 01 -035
1 O-ring 49-91-45 01A-035
2 filter element 49-91-45 01 -030
2 filter element 49-91-45 01A-030
3 O-ring 49-91-45 01 -020
3 O-ring 49-91-45 01A-020
D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-23-51-000-001 Removal of the APU Generator 8XS
24-23-51-400-001 Installation of the APU Generator 8XS
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power
24-42-00-862-001 De-energize the Ground Service Network Supplied from
the External Power
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action
29-14-00-614-002 Pressurization of the Hydraulic Reservoirs through
the Ground Connector
49-00-00-860-003 APU Start by External Power (GTCP 36-300)
49-00-00-860-004 APU Shutdown by External Power (GTCP 36-300)
49-11-00-000-002 Removal of the Generator Substitution Kit (GTCP
36-300)
49-11-00-400-002 Installation of the Generator Substitution Kit
(Flight without Generator) (GTCP 36-300)
49-11-11-000-001 Removal of the Auxiliary Power Unit (APU) - 4005KM
(GTCP 36-300)
49-11-11-400-001 Installation of the Auxiliary Power Unit (APU) -
4005KM (GTCP 36-300)
49-90-00-600-001 Check Oil Level and Replenish (GTCP 36-300)
49-91-41-200-001 Remove and discard Alternator Scavenge Filter Element
(8069KM) (GTCP 36-300)
52-41-00-010-001 Open the APU Doors for Access
52-41-00-410-001 Close the APU Doors after Access
49-91-45-991-002 Fig. 201
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 机载辅助动力 AIRBORNE AUXILIARY POWER 6(131)
