S 485-018-002
 (4)  Connect the test equipment.
 (a)  
Remove the fuel quantity indicator from the pilots' panel (Fig. 501).
 (b)  
Disconnect the electrical connector from the rear of the fuel quantity indicator.
 (c)  
Connect the test harness to the airplane wire bundle.
 (d)  
Connect the test harness to the system test unit (Fig. 502).
 E. Trim Procedure
 S 975-022-002
 (1)  Measure the empty tank capacitances.
 (a)  
Set the FUNCTION SEL switch on the system test unit to EXT CAP (PSD40-1) or set the FUNCT switch to MEASURE EXT (PSD60-1).
 (b)  
Set the FUNCTION MEASURE switch (PSD40-1) or the SELECT switch (PSD60-1) to COMP.
 (c)  
Set the power switch to ON.
 (d)  
Measure the capacitance of the compensator.
 (e)  
The capacitance must be 40.2 picofarads (pf) with a tolerance of |1.2 pf.
 (f)  
Set the FUNCTION MEASURE switch (PSD40-1) or the SELECT switch (PSD60-1) to TU.
 (g)  
Measure the capacitance of the tank units.
 (h)  
The capacitance must have these values with the applicable tolerance. TANK CAPACITANCE (pf) TOLERANCE (pf)
 No. 1 and 2 506.6 |7.8
 Center 180.2 |2.7
 (i)  
If the capacitance is not in the applicable capacitance range, do the system test.
 S 825-023-002
 (2)  Adjust the capacitance trimmer.
 (a)  Get access to the capacitance trimmers on the pilot's instrument panel, P1, above the hand microphone receptacle.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
 AIRPLANES WITH ANALOG FUEL QUANTITY ú  28-41-00
 INDICATORS ú CONFIG 2 ú 02A Page 505 (SIMMONDS SYSTEM TESTER) ú Nov 15/93 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A 737-300/400/500MAINTENANCE MANUAL
Fuel Quantity Indicating System Component Location Figure 501 (Sheet 1) 
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
 AIRPLANES WITH ANALOG FUEL QUANTITY  ú 28-41-00
 INDICATORS  ú CONFIG 2 ú 02A Page 506
 (SIMMONDS SYSTEM TESTER)  ú Jul 15/91 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A
737-300/400/500
MAINTENANCE MANUAL
SEE
BUSSING PLUG SEE
TANK AND COMPENSATOR UNIT BUSSING PLUG 
FUEL QUANTITY INDICATING SYSTEM ELECTRICAL CONNECTOR
C
Fuel Quantity Indicating System Component Location 
Figure 501 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
 AIRPLANES WITH ANALOG FUEL QUANTITY ú 28-41-00
 INDICATORS ú CONFIG 2 ú 02A Page 507 (SIMMONDS SYSTEM TESTER) ú Jul 15/91 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A 737-300/400/500MAINTENANCE MANUAL 
FUNCTION MEASURE SWITCH
SELECT SWITCH 
TESTER POWER SWITCH 
TANK  CABLES ADAPTER  
WING  PSD40-502-3  
CENTER  PSD40-502 
DO NOT 
TO 
CONNECT TO 
COMPENSATOR 
FUEL 
AND TANK 
QUANTITY 
UNITS 
INDICATOR 
SIMMONDS PSD40-1 SYSTEM TESTER
Test Equipment Set-Up for Capacitance Measurement 
Figure 502 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH ANALOG FUEL QUANTITY ú
 28-41-00 INDICATORS ú CONFIG 2
 ú 01A Page 508 (SIMMONDS SYSTEM TESTER) ú Jul 15/93 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A 
737-300/400/500MAINTENANCE MANUAL 
POWER SWITCH 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 燃油 FUEL 3(49)