• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-02 05:53来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF THE LE AND TE
_______ FLAPS AND FLAP DRIVE MECHANISMS BEFORE YOU MOVE THE FLAPS. THE FLAPS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (18)
 Retract the leading edge flaps if you extended them at the start of this procedure (AMM 27-81-00/201).

 S 864-018

 (19)
 Remove the DO-NOT-CLOSE tags and close these circuit breakers:


 (a)  P6 Main Power Distribution Panel 1) EP GND FUELING 2) QTY
 S 824-023
 (20) Do this task:  System Adjustment - Fuel Quantity Indicating System (AMM 28-41-00/501, AMM 28-41-02/501).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-44
 ALL  ú ú 02 Page 408 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 FUEL TANK BULKHEAD (SPAR) RECEPTACLE WIRE HARNESS -
___________________________________________________ INSPECTION/CHECK
________________
 1.  General_______
 A. This procedure contains these tasks:
 (1)  
FQIS Wiring and Component Visual Inspection

 (2)  
FQIS, No. 1 Tank - Inspection

 (3)  
FQIS, No. 2 Tank - Inspection

 (4)  
FQIS, Center Tank - Inspection


 TASK 28-41-44-216-029
 2.  FQIS Wiring and Component Visual Inspection___________________________________________
 A. Access
 (1)  Location Zones
 221 Center Section Fuel Tank
 305 Left Fuel Tank
 405 Right Fuel Tank

 B. Procedure
 S 216-030
 (1)  Examine the wiring for these problems:
 (a)  
Insulation that is abraded, cracked or over-stressed.

 (b)  
Conductors or shields that are broken or exposed

 (c)  
Clearance from the structure that is not sufficient.

 (d)  
Clamps that are loose or missing

 (e)  
Wiring that is routed incorrectly


 S 216-031
 (2) Examine the compensators and tank units for these problems:
 (a)  
Make sure the wiring is correctly attached to the terminals.

 (b)  
Wiring to the terminals that is damaged or is incorrectly routed.

 (c)  
An end cap that is missing.

 (d)  
Clearance from the structure that is not sufficient

 (e)  
Mounting brackets and hardware that are loose.


 TASK 28-41-44-286-001
 3.  FQIS, No. 1 Tank - Inspection_____________________________
 A. References
 (1)  
AMM 28-10-00/201, Fuel Tanks

 (2)  
AMM 28-11-11/401, Wing Fuel Tank Access Panels


 B. Access
 (1)  Location Zones
 305 Left Fuel Tank

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-44
 ALL  ú ú 01 Page 601 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
RIB NO. 1
(SIDE-OF-BODY RIB)

CENTER (WBL 71.24)
FRONT
SPAR
FUEL TANK
(WBL 355.00)
RIB NO. 14 (WS 479.00)
RIB NO. 15 (WS 505.00)
RIB NO. 16 (WS 531.00)
SURGE
TANK

(TOP VIEW)

Rib and Access Locations
Figure 601 (Sheet 1)

M10407
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 28-41-44
 ALL  ú ú 01 Page 602 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SURGE
TANK
RIB NO. 16 (WS 531.00)
RIB NO. 15 (WS 505.00)
RIB NO. 14 (WS 479.00)
FUEL TANK
FRONT
SPAR

RIB NO. 1 (SIDE-OF-BODY RIB)
(WBL 71.24)  RIGHT WING (TOP VIEW)
Rib and Access Locations
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 燃油 FUEL 3(125)