R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 31-66-00Page 40 1303-399, 401-499, 1Aug 01/05 1 1 1CES 1
**ON A/C 001-049, 051-099, 101-149, 201-299,
R The figure shows in detail the progress of the indexes during a complete cycle in normal operation. The sequencing of the slats/flaps position indication is shown on the following figures : first in extension from the CLEAN configuration to the FULL one and then from the FULL configuration to the CLEAN one.
R **ON A/C 106-149,
(Ref. Fig. 019)
R **ON A/C 001-049, 051-099, 101-105, 201-299,
(Ref. Fig. 020)
R **ON A/C 106-149,
(Ref. Fig. 021)
R **ON A/C 001-049, 051-099, 101-105, 201-299,
R (Ref. Fig. 022)
R **ON A/C 151-199, 401-499,
The following table gives the correspondence between the S/F lever positions and the position in degrees of the surfaces.
-----------------------------------------------------------------------------| Lever Position | Slats | FLaps | Indication | -----------------------------------------------------------------------------| 0 | 0 | 0 | -| | 1 | 18 | 10 | 1 + F | | 1 | 18 | 0 | 1 - after auto retraction | | 2 | 22 | 15 | 2 | | 3 | 22 | 20 | 3 | | FULL | 27 | 40 | FULL | -----------------------------------------------------------------------------
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-66-00Page 41 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Flap and slat extension R Figure 019
R 1EFF : 106-149, 303-399, 401-499, 1 31-66-00Page 42 1 1 Aug 01/05 1 1 1CES 1
Flap and slat extension R Figure 020
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-66-00Page 43 1201-299, 301-302, 1Aug 01/05 1 1 1CES 1
Flap and slat retraction R Figure 021
R 1EFF : 106-149, 303-399, 401-499, 1 31-66-00Page 44 1 1 Aug 01/05 1 1 1CES 1
Flap and slat retraction R Figure 022
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-66-00Page 45 1201-299, 301-302, 1Aug 01/05 1 1 1CES 1
R **ON A/C 401-499,
R (Ref. Fig. 017)
R **ON A/C 151-199,
R (Ref. Fig. 018B)
R **ON A/C 151-199, 401-499,
The figure shows in detail the progress of the indexes during a complete
cycle in normal operation.
The sequencing of the slats/flaps position indication is shown on the
following figures : first in extension from the CLEAN configuration to
the FULL one and then from the FULL configuration to the CLEAN one.
R **ON A/C 401-499,
R (Ref. Fig. 019)
R **ON A/C 151-199,
R (Ref. Fig. 020)
R **ON A/C 401-499,
R (Ref. Fig. 021)
R **ON A/C 151-199,
R (Ref. Fig. 022)
R 1EFF : 151-199, 401-499, 1 31-66-00Page 46 1 1 Aug 01/05 1 1 1CES 1
**ON A/C 301-399,
The following table gives the correspondence between the S/F lever positions and the position in degrees of the surfaces.
-----------------------------------------------------------------------------| Lever Position | Slats | FLaps | Indication | -----------------------------------------------------------------------------| 0 | 0 | 0 | -| | 1 | 18 | 10 | 1 + F | | 1 | 18 | 0 | 1 - after auto retraction | | 2 | 22 | 14 | 2 | | 3 | 22 | 21 | 3 | | FULL | 27 | 25 | FULL | -----------------------------------------------------------------------------
R **ON A/C 301-302,
R (Ref. Fig. 018)
R **ON A/C 303-399,
R (Ref. Fig. 018A)
**ON A/C 301-399,
R The figure shows in detail the progress of the indexes during a complete cycle in normal operation. The sequencing of the slats/flaps position indication is shown on the following figures : first in extension from the CLEAN configuration to the FULL one and then from the FULL configuration to the CLEAN one.
R **ON A/C 303-399,
(Ref. Fig. 019)
R **ON A/C 301-302,
(Ref. Fig. 020)
R 1EFF : 301-399, 1 31-66-00Page 47 1 1 Aug 01/05 1 1 1CES 1
R **ON A/C 303-399,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 8(80)
