PFD - MDA/MDH indication
Figure 047
R 1EFF : 106-149, 303-399, 401-499, 1 31-64-00Page A7 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
| PARAMETERS | DISPLAY | |---------------------|-------------------------------------------------------| | | the scale, and | | | - flight phase is 7 or 8, and | | | - aircraft is not in standard reference, and | | | - landing elevation is valid. | -------------------------------------------------------------------------------| RA not valid or NCD,| This ribbon is displayed from 0 feet graduation | | and QFE reference | (bottom of the scale if 0 ft graduation is outside | | selected | the scale) if: | | | - MDA/MDH is valid and is inside the displayed area of| | | the scale, and | | | - flight phase is 7 or 8, and | | | - aircraft is not in standard reference. |
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
(11) The table below gives the conditions of display of the altitude information:
-------------------------------------------------------------------------------| PARAMETERS | DISPLAY | |--------------------|--------------------------------------------------------| | Altitude scale | - White. | | | - Upper and lower values white, red when altitude is | | | not valid. | |--------------------|--------------------------------------------------------| | Actual altitude | - Green if altitude (standard or baro) is valid. | | (digital value) | - Amber when altitude is below MDA. | | | - Actual altitude is not displayed if altitude is not | | | valid. | | | - Altitude reference line yellow. |
1EFF : ALL 1 31-64-00Page A8 1 1 May 01/05 1 1 1CES 1
**ON A/C ALL
(12) The table below gives the conditions of display of the altitude information:
-------------------------------------------------------------------------------| PARAMETERS | DISPLAY | |--------------------|--------------------------------------------------------| | Baro correction | - If standard altitude used (selected on FCU) : STD | | | cyan in a yellow box, flashing when actual altitude | | | is below transition altitude. | | | - If baro altitude used (selected on FCU) : QNH or QFE | | | (This last displayed in a white box ) white below | | | the correction value. | | | - The correction value is displayed in Hpa or inches | | | of Hg according to FCU selection (in cyan colour). | | | - The selected baro reference and the digital value | | | are both flashing when actual altitude is above | | | transition altitude. | |--------------------|--------------------------------------------------------| | Landing elevation | - brown ribbon on altitude scale when baro altitude | | (ground reference) | is used, landing elevation is valid and the | | | difference between landing elevation and actual | | | altitude is less than 570 ft. Moreover, landing | | | elevation is displayed only during flight phases | | | 7 and 8. | | Altitude digital | - Yellow when actual altitude is between the boundaries| | readout window | (sel alt. -250ft., sel alt. +250ft.). | | | - Pulsing in yellow when actual altitude is outside | | | the above interval, but gets closer to selected | | | altitude. | | | - Flashing in amber when actual altitude is outside | | | the above interval and the difference with selected | | | altitude increases. | |--------------------|--------------------------------------------------------| | Selected altitude | - Cyan if altitude is selected on FCU. | | | - Magenta if altitude constraint comes from FMGC. | | | When the value is within the boundaries (actual | | | altitude -575ft., actual altitude +575ft.), it is | | | boxed by the selected altitude symbol, in the same | | | color. | | | Out of these boundaries, the digital value is | | | displayed above or below the altitude scale according| | | to the difference with actual altitude. | | | Baro altitude is displayed in feet, standard altitude| | | is displayed in hundreds of feet. |
R 1EFF : ALL 1 31-64-00Page A9 1 1 May 01/05 1 1 1CES 1 -------------------------------------------------------------------------------| PARAMETERS | DISPLAY | |--------------------|--------------------------------------------------------| | Radio altitude | - Red ribbon located on the right side of the altitude | | reference | scale when radio altitude is valid. | |--------------------|--------------------------------------------------------| | Linear deviation | - Filled magenta circle when flight path altitude is | | with respect to | valid. | | vertical profile | |
R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
Post SB 31-1127 For A/C 001-049,101-103,201-203,
Post SB 31-1132 For A/C 001-049,101-105,201-203,
| Selected altitude | - The selected altitude value (5 digits) is displayed | | | in meters above the altitude scale, when METRIC ALT | | | is selected on the FCU (depending on the METER pin | | | program) |
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 8(22)
