1EFF : ALL 1 31-67-32Page 18 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 106-149, 303-399, 401-499,
H. Item 8: Brake temperature The digits for the brake temperature value are normally displayed in green (from 0 to 995.C by step of 5.C). They are displayed in amber when an over heat occurs on the corresponding brake as transmitted by the SDAC. They remain displayed in green when the overheat signal is not transmitted correctly. The value is replaced by amber XX when transmitted as not valid by the SDAC.
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
J. Item 7: Brake temperature The digits for the brake temperature value are normally displayed in green. They are displayed in amber when an over heat occurs on the corresponding brake as transmitted by the SDAC. They remain displayed in green when the overheat signal is not transmitted correctly.
R **ON A/C 106-149, 303-399, 401-499,
Item 9: Wheel number The wheel number is displayed in white. Only the brake release changes (ref. below).
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
Item 8: Wheel number The wheel number is displayed in white. Only the brake release changes (ref. below).
R **ON A/C 106-149, 303-399, 401-499,
Item 10: Tire pressure indication (optional)
The pressure of the related wheel is normally displayed in green, except
when a low pressure occurs, it is then displayed in amber.
When the low pressure information is not transmitted correctly by the
SDAC, the pressure value is replaced by amber XX.
The value can vary from 0 to 255 PSI by steps of 5 PSI.
1EFF : ALL 1 31-67-32Page 19 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 051-099,
Item 9: Tire pressure indication (optional)
The pressure of the related wheel is normally displayed in green, except
when a low pressure occurs, it is then displayed in amber.
When the low pressure information is not transmitted correctly, the
pressure value remains green.
R **ON A/C 106-149, 303-399, 401-499,
Item 11: Brake release
*** basic configuration ***
*** ENHANCED MSG DISPLAY OPTION ACTIVATED ***
*** option 8-wheel ***
When the brake of the related wheel is released, as transmitted by the
SDAC, the small symbol featuring the brakes next to the white REL
indication is displayed in green in normal operation on each individual
wheel.
*** ENHANCED MSG DISPLAY OPTION ACTIVATED ***
*** NEW MSG DISPLAY OPTION ACTIVATED ***
In amber on each individual wheel if there is a brake released fault. Or
in amber for all wheels in same time in case of loss of the NORM breaking
function, or loss of the ANTISKID function together wuth the loss of the
ALTN BRK function on the left wheels or on the right wheels.
It is not displayed when the brake is not released or when information is
not transmitted correctly by the SDAC.
**ON A/C 001-049, 101-105, 151-199, 201-299, 301-302,
Item 09: Brake release
**ON A/C 051-099,
Item 10: Brake release
1EFF : ALL 1 31-67-32Page 20 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
When the brake of the related wheel is released, as transmitted by the SDAC, the REL symbol (green lines) is displayed with the REL cyan indication.The REL symbol is not displayed when the brake is not released or when the information is not transmitted correctly.
R **ON A/C 106-149, 303-399, 401-499,
K. Item 12: Normal and Alternate Breaking Messages
(1) ANTI SKID Message This message, normally not displayed, is displayed in amber when:
-the anti skid switch is OFF as transmitted by the SDAC, - or both BSCU channels are faulty as transmitted by the SDAC.
*** ENHANCED MSG DISPLAY OPTION ACTIVATED ***
(2) ANTI SKID Message This message, normally not displayed, is displayed in green when:
-The message NORM BRK is displayed in amber,
- or the message ALTN BRK is displayed in amber,
- or the message AUTO BRK is displayed in amber.
This message is displayed in amber when:
-the anti skid switch is OFF,
- or both BSCU channels are faulty as transmitted by the SDAC,
- or the message NORM BRK is displayed in amber and the pressure of
the yellow hydraulic circuit is low.
*** NEW MSG DISPLAY OPTION ACTIVATED ***
(3) System 1/2 related to ANTI SKID status At the same time as the ANTI SKID message, the status of the BSCU system 1 is displayed.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 8(123)
