曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
27-41-71-400-801 Stabilizer Trim Motor Installation (P/B 401)
27-41-81-200-802 Upper and Lower Gimbal Wear Limits Inspection (P/B 601)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
COM-1550 Meter - Bonding
(Part #: C15292, Supplier: 01014, A/P Effectivity: 737-ALL)
(Part #: M1, Supplier: 3AD17, A/P Effectivity: 737-ALL)
(Part #: M1B, Supplier: 3AD17, A/P Effectivity: 737-ALL)
(Part #: MODEL 1010-A, Supplier: 3AD17, A/P Effectivity: 737-ALL)
COM-1557 Gauge - Force
(Part #: DG-200, Supplier: 92456, A/P Effectivity: 737-ALL)
(Part #: DPP-500G, Supplier: 92456, A/P Effectivity: 737-ALL)
(Part #: DPPH-150, Supplier: 92456, A/P Effectivity: 737-ALL)
(Part #: DPPH-50, Supplier: 92456, A/P Effectivity: 737-ALL)
(Part #: FDIX 100, Supplier: 0BFD9, A/P Effectivity: 737-ALL)
(Part #: FDIX 50, Supplier: 0BFD9, A/P Effectivity: 737-ALL)
(Part #: FDV 50, Supplier: 0BFD9, A/P Effectivity: 737-ALL)
(Opt Part #: FDI 100, Supplier: 0BFD9, A/P Effectivity: 737-ALL)
SPL-1569 Clamp - Control Cable
(Part #: A20005-9, Supplier: 81205, A/P Effectivity: 737-100, -200,
-200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900,
-900ER, -BBJ)
SPL-1678 Assembly - Lock, Horizontal Stabilizer
(Part #: F80027-13, Supplier: 81205, A/P Effectivity: 737-100, -200,
-200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900,
-900ER, -BBJ)
SPL-1684 Assembly - Wrench, Pinion Gear, Stabilizer Trim Actuator
(Part #: F71267, Supplier: 81205, A/P Effectivity: 737-100, -200, -200C,
-300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900, -900ER,
-BBJ)
(Opt Part #: F71252, Supplier: 81205, A/P Effectivity: 737-100, -200,
-200C, -300, -400, -500)
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-81
Page 414
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(Continued)
Reference Description
SPL-1728 Equipment - Handling, Stabilizer Jackscrew (Dome Pressure
Bulkhead)
(Part #: C27050-32, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -BBJ)
C. Consumable Materials
Reference Description Specification
C00913 Compound - Nondrying Resin Mix Corrosion
Inhibiting Material
BMS3-27
D00633 Grease - Aircraft General Purpose BMS3-33
G01912 Lockwire - Monel (0.032 In. Dia.) NASM20995N~
C32
(QQ-N-281)
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
52 Pin 27-41-71-01-070 GUN 001-028, 101-121,
155-157, 201-999
61 Pin 27-41-61-01-110 GUN 101-122
27-41-61-02-075 GUN 001-099, 155-157,
201-999
E. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
210 Subzone - Control Compartment - Body Station 178.00 to Body
Station 259.50
311 Area Aft of Pressure Bulkhead - Left
312 Area Aft of Pressure Bulkhead - Right
F. Access Panels
Number Name/Location
112A Forward Access Door
311BL Stabilizer Trim Access Door
G. Stabilizer Trim Actuator Installation
SUBTASK 27-41-81-220-001
(1) Do this task: Upper and Lower Gimbal Wear Limits Inspection (Upper and Lower Gimbal Wear
Limits Inspection, TASK 27-41-81-200-802).
SUBTASK 27-41-81-020-008
(2) If the cable drum guard [67] and spacers [26] are installed on the cable drum [27], then do these
steps (Figure 402):
(a) Remove the bolts [63] and washers [64] from the support plate [62].
(b) Remove the bolts [48] and washers [49] that attach the cable drum guard [67] to the cable
drum [27].
(c) Remove the nut [60], washer [59], washer [58], and bolt [57] that attach the cable drum
guard [67] to the support plate [62].
(d) Remove the cable drum guard [67] and spacers [26].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-41-81
Page 415
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-41-81-480-005
(3) Install the hoist adapter and hoist to the jackscrew gearbox [24] (Figure 403).
SUBTASK 27-41-81-480-006
(4) Lift the stabilizer trim actuator [53] into the airplane (Figure 402).
SUBTASK 27-41-81-420-001
(5) Install the stabilizer trim actuator [53]:
(a) Install the jackscrew [23] through the jackscrew fitting assembly [21].
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飞机维护手册4(8)
