• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2010-08-24 13:01来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

543 Left Wing - Fairing Flap Support No. 2
544 Left Wing - Fairing Flap Support No. 1
550 Subzone - Left Wing: Trailing Edge, Aft of Rear Spar, Inbd of
Outboard Trailing Edge Flap
560 Subzone - Left Wing: Trailing Edge , Aft of Rear Spar, Outboard of
Inbd Trailing Edge Flap, Inbd of Fixed Trailing Edge
641 Right Wing - Fairing Flap Support No. 5
642 Right Wing - Fairing Flap Support No. 6
643 Right Wing - Fairing Flap Support No. 7
644 Right Wing - Fairing Flap Support No. 8
650 Subzone - Right Wing: Trailing Edge, Aft of Rear Spar, Inboard of
Outboard Trailing Edge Flap
660 Subzone - Right Wing: Trailing Edge, Aft of Rear Spar, Outboard of
Inboard Trailing Edge Flap, Inboard of Fixed Trailing Edge
C. Procedure
SUBTASK 27-51-00-480-012
WARNING: MAKE SURE THE DOWNLOCK PINS ARE INSTALLED ON ALL THE LANDING GEAR.
WITHOUT THE DOWNLOCK PINS, THE LANDING GEAR CAN RETRACT AND CAUSE
INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) If the downlock pins are not installed in the nose and main landing gear, do this task: Landing
Gear Downlock Pins Installation, TASK 32-00-01-480-801.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-00
Page 601
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-00-010-009
(2) Extend the trailing edge flaps to the 40-unit position. To extend the flaps, do this task: Extend the
Trailing Edge Flaps, TASK 27-51-00-860-803.
SUBTASK 27-51-00-040-006
(3) Do this task: Trailing Edge Flap System Deactivation, TASK 27-51-00-040-801.
SUBTASK 27-51-00-210-003
(4) Do a general visual inspection of these items:
(a) Flap transmissions
(b) Torque tube support
(c) Seal rib angle gearbox
(d) Main landing gear beam angle gearbox
(e) Torque tube couplings
(f) Tee angle gearbox and U-joint
SUBTASK 27-51-00-440-005
(5) Do this task: Trailing Edge Flap System Reactivation, TASK 27-51-00-440-801.
SUBTASK 27-51-00-010-010
(6) Retract the trailing edge flaps to the retracted position. To retract the flaps, do this task: Retract
the Trailing Edge Flaps, TASK 27-51-00-860-804.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-00
Page 602
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Trailing Edge Flap Drive System Inspection
Figure 601/27-51-00-990-812
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-00
Page 603
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-00-210-802
3. Trailing Edge Flap Actuation System Inspection
A. References
Reference Title
27-51-00-040-801 Trailing Edge Flap System Deactivation (P/B 201)
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-00-860-803 Extend the Trailing Edge Flaps (P/B 201)
27-51-00-860-804 Retract the Trailing Edge Flaps (P/B 201)
32-00-01-480-801 Landing Gear Downlock Pins Installation (P/B 201)
B. Consumable Materials
Reference Description Specification
A00247 Sealant - Pressure And Environmental - Chromate
Type
BMS5-95
C00528 Compound - Corrosion Preventive, Petroleum Hot
Application (Soft Film)
MIL-C-11796,
Class III
C. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
542 Left Wing - Fairing Flap Support No. 3
543 Left Wing - Fairing Flap Support No. 2
544 Left Wing - Fairing Flap Support No. 1
550 Subzone - Left Wing: Trailing Edge, Aft of Rear Spar, Inbd of
Outboard Trailing Edge Flap
560 Subzone - Left Wing: Trailing Edge , Aft of Rear Spar, Outboard of
Inbd Trailing Edge Flap, Inbd of Fixed Trailing Edge
642 Right Wing - Fairing Flap Support No. 6
643 Right Wing - Fairing Flap Support No. 7
644 Right Wing - Fairing Flap Support No. 8
650 Subzone - Right Wing: Trailing Edge, Aft of Rear Spar, Inboard of
Outboard Trailing Edge Flap
660 Subzone - Right Wing: Trailing Edge, Aft of Rear Spar, Outboard of
Inboard Trailing Edge Flap, Inboard of Fixed Trailing Edge
D. Access Panels
Number Name/Location
567BT Flap, Forward Carriage Bearing And Fitting
567ET Flap, Forward Carriage Bearing And Fitting
667BT Flap, Forward Carriage Bearing And Fitting
667ET Flap, Forward Carriage Bearing And Fitting
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飞机维护手册4(63)