LARGE SEALANT FAIRING TOOL
0.5 INCH
SMALL SEALANT
(1.27 mm)
CUTTING TOOL APPROXIMATELY
NOTE: THESE TOOLS SHOULD BE MADE OF NOTE: THESE TOOLS CAN BE MADE OF
PLASTIC, HARDWOOD, OR METAL NO 0.25 INCH (6.35 mm) DIA BRONZE
HARDER THAN 2024-T3 ALUMINUM TO OR STEEL WELDING ROD AND CAN
REDUCE THE POSSIBILITY OF DAMAGE BE PLATED TO IMPROVE THE
TO THE STRUCTURE (PLASTIC AND SMOOTHNESS
HARDWOOD TOOLS ARE RECOMMENDED).
SEALANT REMOVAL AND CUTTING TOOLS SEALANT FAIRING TOOLS (ST982H AND ST982N)
Sealant Removal, Cutting and Fairing Tools
Figure 801 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ALL ú ú 01 Page 804 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L48297
A
747-400
MAINTENANCE MANUAL
TOOLS TO REMOVE UNWANTED SEALANT (SCRAPERS)
Sealant Removal, Cutting and Fairing Tools
Figure 801 (Sheet 2)
L48308
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ALL ú ú 01 Page 805 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
1.50 INCH
(38.1 mm) DIAMETER
(25.4 mm)
MATERIAL: MILD STEEL CADIUM PLATED
Sealant Injection Tools Figure 802
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ALL ú ú 01 Page 806 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SCARF EDGE
Fillet Seal Removal
Figure 803
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ALL ú ú 01 Page 807 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
AT 77`F (25`C) AND 50% RELATIVE HUMIDITY AMBIENT CONDITIONS. OTHER TEMPERATURE AND RELATIVE HUMIDITY CONDITIONS WILL CHANGE THE TIMES.
DO NOT LET FUEL TOUCH THE SEALANT UNTIL IT IS NOT TACKY FOR A MINIMUM OF 2 HOURS.
WHEN YOU USE PROSEAL 860, NO PRECOAT IS NECESSARY. PROSEAL 860 IS RECOMMENDED FOR SMALL REPAIRS ONLY, DUE TO ITS SHORT APPLICATION TIME. AVAILABLE FROM COURTAULDS AEROSPACE, GLENDALE, CALIFORNIA.
USED TO REPAIR FILLET SEALS OF BMS 5-26 TYPE II, OR BMS 5-45. AVAILABLE FROM COURTAULDS AEROSPACE, GLENDALE, CALIFORNIA.
USED WITH FAYING SURFACE SEALS THAT HAVE A LONG SQUEEZE-OUT LIFE THIS SEALANT IS WHITE. THUS, IT IS EASY TO SEE THE REPAIRED AREA.
MIX BMS 5-26 TYPE II, OR BMS 5-45, CLASS B-2 SEALANT WITH A 20:100 ACCELARATOR/BASE RATIO BY WEIGHT OR GET THIS SEALANT PRE-MIXED.
Sealant Usable Time
Figure 804
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ALL ú ú 01 Page 808 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
CLASS A-2
Application of Precoat
Figure 805
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-00
ALL ú ú 01 Page 809 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 燃油 FUEL 1(94)
