B.
References
(1)
AMM 29-09-00/201, Hydraulic Reservoir Pressurization System
(2)
AMM 29-15-00/201, Hydraulic Systems A, B, and Standby
C.
Access
(1)
Location Zones
101 Control Cabin, LH
102 Control Cabin, RH
216 Main Wheel Well, LH
217 Main Wheel Well, RH
D.
Prepare for Removal
(1)
Remove hydraulic power systems A and B (AMM 29-15-00/201).
S 864-050
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-09-31
ALL ú ú 01 Page 401 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SEE A
SPOILER SHUTOFF VALVE (REF) MODULAR PACKAGE HOUSING LOW PRESSURE WARNING SWITCH VALVE MOTOR FLIGHT CONTROLS SHUTOFF VALVE SEE B
2 1 MOUNTING SCREWS
3 1 5 2 6 7 4 MOUNTING BOLTS
VALVE MOTOR
A MOUNTING (4 LOCATIONS) SCREWS
(4 LOCATIONS) BOLTS MOUNTING
VALVE
VALVE CAM
O-RINGS (5 LOCATIONS)
B
Figure 401 Flight Controls Shutoff Valve Installation
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-09-31
ALL ú ú 02 Page 402 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 864-051
(2)
Make sure you depressurize the reservoir (AMM 29-09-00/201).
S 864-006
(3)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a)
P6-2 Circuit Breaker Panel 1) SHUTOFF VALVES - FLT CONT (two locations)
E.
Remove the Flight Controls Shutoff Valve
S 424-041
(1)
Remove the shutoff valve:
(a)
Disconnect the electrical connector from the valve motor (Fig. 401).
(b)
Remove the four mounting bolts that attach the valve to the modular package housing.
(c)
Carefully turn and lift the shutoff valve straight up to remove it from the modular package housing.
(d)
Use a container to catch hydraulic fluid that drains from the valve.
(e)
Put a cover on the modular package housing to keep contamination out of the open valve hole.
TASK 27-09-31-404-042
3. Flight Controls Shutoff Valve Installation__________________________________________
A. General
(1)
This procedure is the installation of the shutoff valve assembly, which contains the motor and the valve. If it is necessary to only install the motor, use the procedure in paragraph 5.
B.
Consumable Materials
(1)
D00288 Lubricant, Skydrol Assembly - MCS 352
(2)
D00148 Fluid-Hydraulic, BMS 3-11, Type IV, Class 1
C.
References
(1)
AMM 12-12-00/301, Hydraulic Reservoirs
(2)
AMM 27-09-31/501, Flight Controls Shutoff Valve
D.
Access
(1)
Location Zones
101 Control Cabin, LH
102 Control Cabin, RH
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 1(28)