AIDS Report Stall Stable Rep.06
Figure 035
1EFF : 151-199, 201-210, 1 31-36-00Page A71 1 1 Config-2 May 01/05R 1 1 1CES 1
AIDS Oil Table Programming Rep. 07
Figure 036
1EFF : 151-199, 201-210, 1 31-36-00Page A72 1 1 Config-2 May 01/05R 1 1 1CES 1
-
select '<INDIVIDUAL REP PROG' on the AIDS Print Report Menu,
-
select '<LIMITS' on the AIDS Individual Report Programming Menu,
-enter '7' via the scratchpad for report number 07,
-select 'STALL TABLE>' on the AIDS Report Limits Page, assumed the report 07 is selected,
-the AIDS Report Oil Table Page comes on.
The operator may modify the oil pressure values via the srcatchpad. Also by activating the appropriate left hand LS keys and the corresponding N2 values with the right hand LS keys. There are two oil tables stored for different logics. The actual table number will be displayed in line 12. Scrolling will display the table 2. The values for the oil tables will be stored in the RPMB. Access code 3 is required to modify the values.
c Programming the Gross Weight Limit Table for Report No. 15.
_ (Ref. Fig. 037) The procedure to program and/or modify the Gross Weight Limit (GWL) table for report No. 15 is as follows:
-
select '<INDIVIDUAL REP PROG' on the AIDS Print Report Menu,
-
select '<LIMITS' on the AIDS Individual Report Programming Menu,
-enter '15' via the scratchpad for report number 15,
-select 'STALL TABLE>' on the AIDS Report Limits Page, assumed the report 15 is selected,
-the AIDS Gross Weight Limit Table Page comes on.
The operator may program the A/C ident via the scratchpad. Also by activating the left hand LS keys and the corresponding GW values with the right hand LS keys. Scrolling will display the rest of the 99 entries. The values for the GW values will be stored in the RPMB. Access code 1 is required to modify the values.
3 Programming the Report Start Logic
_ (Ref. Fig. 038) The operator may create and/or modify, for any of the AIDS reports, a special start logic. The following logic definitions are available for programming: 'AND', 'OR', 'NAND', 'NOR' and 'XOR'.
1EFF : 151-199, 201-210, 1 31-36-00Page A73 1 1 Config-2 May 01/05R 1 1 1CES 1
AIDS Gross Weight Limit Programming Rep. 15
Figure 037
1EFF : 151-199, 201-210, 1 31-36-00Page A74 1 1 Config-2 May 01/05R 1 1 1CES 1
AIDS Report Start Logic Programming
Figure 038
1EFF : 151-199, 201-210, 1 31-36-00Page A75 1 1 Config-2 May 01/05R 1 1 1CES 1
4
_
Independent from the fixed trigger logic for the various print reports there is a programmable start logic provided for each print report. The DMU provide an adequat programming menu via the MCDU to enable this function.
The procedure to create a start logic is as follows:
-
select '<INDIVIDUAL REP PROG' on the AIDS Print Report Menu,
-
select '<START LOGIC' on the AIDS Individual Report Programming Menu,
-the AIDS Report Start Logic Page comes on.
A programmable combination of up to 40 parameter conditions for the start of a report is possible. The combination of the 40 parameters may be specified in logic trees. The flight phase, stable frame conditions and a time considered as parameters to be usable for start programming. Each report (Except report 16, 17, 18) triggered by this logic stop, when it is completed. For the programmable reports 16, 17 and 18 a stop logic is programmable similar to the start logic. The reports stop, when the stop logic is true or the report is completed. It is possible to use those 40 conditions for the DAR start/stop logic for the DAR and for the reports.
Individual Report Number Inhibit (Ref. Fig. 039) For each individual report the operator may program via the MCDU, a counter limit associated to the generation, storing, printing and linking to ACARS functions. If this limit is reached, the DMU inhibits further performing of the associated function during the actual flight leg. The procedure is as follows:
-
select '<INDIVIDUAL REP PROG' on the AIDS Print Report Menu,
-
select '<INHIB' on the AIDS Individual Report Programming Menu,
-the AIDS Report Number Inhibit Page comes on.
On line # 3, the DMU displays the report number displayed on the Individual Report Programming menu. The operator may either use the NEXT PAGE key or enter a new report number via the scratchpad. Also by activating the 1L key to change the displayed report number.
1EFF : 151-199, 201-210, 1 31-36-00Page A76 1 1 Config-2 May 01/05R 1 1 1CES 1
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 3(98)
