3. Job Set-up
__________
Subtask 31-36-00-860-061
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002)
(2)
Energize the CFDS.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-36-00Page 236 1201-210, 1May 01/05 1 1 1CES 1 Subtask 31-36-00-865-068
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU FDIU & QAR 8TU K17 121VU AIDS/DMU 4TV K15 121VU ENGINE/ENG1 AND 2/EVMU 1EV R44
4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-105,
Subtask 31-36-00-740-058
A. AIDS DMU Programming Procedure.
(1) Get access to the PROGRAMMING MENU.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU: On the MCDU display:
- Push the MCDU MENU mode key. - The MCDU MENU page comes into view.
- Push the line key adjacent to < - The AIDS page comes into view.
AIDS indication.
- Push the line key adjacent to < - The PROGRAMMING page comes into view.
PROGRAMMING indication.
- Enter the Password with the
alphanumeric keys.
NOTE : The password is defined via____
GSE (Standard = SFIM).
- Push the line key adjacent to < - The PROGRAMMING MENUS indication
ENTER PASSWORD indication. becomes cyan.
- The '<' mark adds to the <
PROGRAMMING MENUS indication.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-36-00Page 237 1201-210, 1May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- Push the line key adjacent to < - The AIDS DMU PROGRAMMING page comes
PROGRAMMING MENUS indication. into view.
Subtask 31-36-00-740-063
B. Programmable Report Inhibit
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:
-
Push the line key adjacent to < REPORT INHIBIT indication.
-
Push the line key adjacent to * YES PRINT or PRINT NO * indication to set the print function.
-
Push the line key adjacent to * YES LINK or LINK NO * indication to set the ACARS downlink function.
-
Push the line key adjacent to < RETURN indication.
On the MCDU display:
-The AIDS REPORT INHIBIT page comesinto view.
-
If the print function is set the lineshows YES PRINT NO *.
-
If the print function is not set the line shows * YES PRINT NO.
-
If the ACARS downlink function is setthe line shows YES LINK NO *.
-
If the ACARS downlink function is notset the line shows * YES LINK NO.
-The AIDS DMU PROGRAMMING page comesinto view.
R 1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page 238 1 1 May 01/05 1 1 1CES 1 Subtask 31-36-00-740-064
C. Programmable Report Limits.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:
-Push the line key adjacent to < REPORT LIMITS indication.
-Enter the Parameter Number of the Limit Table with the alphanumeric keys.
-Push the line key adjacent to PARAM NB <- XXXX indication to take over the Parameter Number.
-Enter the new Limit value with the alphanumeric keys.
-Push the line key adjacent to the arrow below the NEW LIMIT indication to take over the new Limit value.
-Enter the Validity value with the alphanumeric keys in the format as follows: two digits + LEG: 'XXLEG'(e.g. 10LEG) or three digits + DAY: 'TTTDAY'(e.g. 123DAY).
-Push the line key adjacent to the arrow below the VALIDITY indication to take over the new Validity value.
-Enter the Reason of the Report Limit Change with the alphanumeric keys.
On the MCDU display:
-
The AIDS REPORT LIMITS page comesinto view.
-
The Parameter Number shows on thebottom of the display (scratchpad).
-On the AIDS REPORT LIMITS page addsfollowing indication:OLD LIMIT, NEW LIMIT, VALIDITY, REASON, VALIDATE and RETURN TO DEFAULT.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 4
