1EFF : 151-199, 201-210, 1 31-36-00Page B3 1 1 Config-2 May 01/05R 1 1 1CES 1
AIDS CPU2 Programming Load Report 15
Figure 056
1EFF : 151-199, 201-210, 1 31-36-00Page B4 1 1 Config-2 May 01/05R 1 1 1CES 1
AIDS CPU2 Print Load Report 15
Figure 057
1EFF : 151-199, 201-210, 1 31-36-00Page B5 1 1 Config-2 May 01/05R 1 1 1CES 1
AIDS CPU2 Limits Load Report 15
Figure 058
1EFF : 151-199, 201-210, 1 31-36-00Page B6 1 1 Config-2 May 01/05R 1 1 1CES 1
Start/Stop of DAR by Manual Request
Figure 059
1EFF : 151-199, 201-210, 1 31-36-00Page B7 1 1 Config-2 May 01/05R 1 1 1CES 1
-Activating 5R beside the 'STOP*' will cancel the manual run command. If the DAR was started it continues running until the stop logic is true. This means that the 'automatic run' and the 'manual run' are 'OR'ed together and the 'automatic stop' and the 'manual stop' are 'AND'ed together.
(14) Generation, Print Out and Sending Reports to ACARS by Manual Request. (Ref. Fig. 060) Each AIDS report may be printed and/or transmitted to ACARS by manual request via the MCDU. In this case the report will be generated at once, independently of the logic otherwise programmed. The procedure is as follows:
-
select 'AIDS' on the MCDU Menu,
-
select 'Man Req Rep <SEND/PRINT' on the AIDS Main Menu,
-the AIDS Manual Request Report Page comes on.
A list of all available AIDS reports is presented on the screen.
If the printer is available and not busy, a asterix appears besides
each report on the right side. If ACARS is available, a asterix
appears besides each report on the left side.
Activating the scroll key will cause all 10 lines to be rotated. In
the direction indicated in order to present the next five reports.
-Start the generation and the print out of the desired report by activating the appropriate LS key which is on the right of the screen (below 'PRINT').
If the report is sent to ACARS within 2 seconds the appropriate LS key on the left side has to be activated (below the 'SEND'). The asterixs then disappear from the screen as long as the printer and/or ACARS are occupied.
(15) Print Out Stored Reports are Sent to ACARS by Manual Request (Ref. Fig. 061) AIDS reports which are stored in the print report buffer (maximal 10 reports), may be printed and/or transmitted to ACARS by manual request via the MCDU. The procedure is as follows:
-
select 'AIDS' on MCDU Menu,
-
select 'Stored Rep SEND/PRINT>' on the AIDS Main Menu,
-the AIDS Stored Report Page comes on.
A list of all stored AIDS reports is presented on the screen. Activating the scroll key will cause all 10 lines to be rotated, in the direction indicated in order to present the next 5 reports. Below each report some remarks can be displayed described as follows: 'DNLKD' means that the report was successfully downlinked by ACARS.
1EFF : 151-199, 201-210, 1 31-36-00Page B8 1 1 Config-2 May 01/05R 1 1 1CES 1
Generation Print Out and Send Reports to ACARS by Manual Request Figure 060
1EFF : 151-199, 201-210, 1 31-36-00Page B9 1 1 Config-2 May 01/05R 1 1 1CES 1
Print Out and Send Stored Reports to ACARS by Manual Request
Figure 061
R 1EFF : 151-199, 201-210, 1 31-36-00Page B10 1 1 Config-2 May 01/05 1 1 1CES 1 'IN ACARS' means that the report was sent from 'AIDS' to the 'ACARS MU' but reception from the ground station was not yet confirmed. 'LEG - 01' e.g. means that the report was generated during the previous flight leg. 'PRINTED' means that the report was already printed. If the printer is available and not busy, an asterix appears besides each reporton the right side. If ACARS is available, an asterix appears besides each report on the left side. Start the print out of the desired report by activating the appropriate LS key on the right side of the screen (below 'PRINT'). Initiate sending a report to ACARS by activating the appropriate LS key on the left of the screen (below 'SEND'). The asterix then disappear from the screen as long as the printer or ACARS are occupied. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM 指示/记录系统 3(104)
