(2)
Make sure that the printer contains paper. NOTE : If not, put paper in the printer (Ref. TASK 31-35-22-600-001).
____
1EFF : ALL 1 31-35-00Page 501 1 1 Feb 01/01R 1 1 1CES 1
Subtask 31-35-00-865-050
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU PTR/SPLY 6TW J21 121VU CFDS/CFDIU/SPLY 2TW J18 R
R **ON A/C ALL
R Post SB 31-1163 For A/C 155-156,208-209,
R 121VU CFDS/CFDIU/BACK/UP 8TW J17
R **ON A/C ALL
4. Procedure
_________
Subtask 31-35-00-710-050
A. Test
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R 1. Adjust the brightness of the MCDU R 1 screen. R
2. On the MCDU1:
-push the line key adjacent to the CFDS indication.
3. On the MCDU1:
-push the line key adjacent to the LAST LEG REPORT indication.
4. On the MCDU1:
-push the line key adjacent to the PRINT indication.
On the MCDU1:
-The MCDU is on.
On the MCDU1:
-
the CFDS menu comes into view.
On the MCDU1:
-
the LAST LEG REPORT page comes intoview.
On the printer:
-
the printer prints the MCDU page.
1EFF : ALL 1 31-35-00Page 502 1 1 Feb 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------NOTE : Make sure that the printed page
____ agrees with the page on the MCDU.
5. On the MCDU1:
-push the line key adjacent to
the RETURN indication until the
CFDS MENU page comes into view.
5. Close-up
________
Subtask 31-35-00-860-051
A. Put the aircraft back to its initial configuration.
(1)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
(2)
Make sure that the work area is clean and clear of tool(s) and other items.
1EFF : ALL 1 31-35-00Page 503 1 1 Feb 01/05R 1 1 1CES 1
PRINTER (4TW) - SERVICING
_________________________
TASK 31-35-22-600-001
Servicing of the Printer (4TW)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
paper roll 31-35-22 01 -010 R
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-35-22-991-002 Fig. 301
3. Job Set-up
__________
Subtask 31-35-22-860-050
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Push the SLEW pushbutton switch (4) to remove the remaining paper from the printer.
1EFF : ALL 1 31-35-22Page 301 1 1 Nov 01/00 1 1 1CES 1 Subtask 31-35-22-865-053
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU PTR/SPLY 6TW J21
4. Procedure
_________
(Ref. Fig. 301/TASK 31-35-22-991-002) Subtask 31-35-22-420-051
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 3(7)
