-
Push the line select key adjacent to '<DMU' on the Recorder Menu
1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page A39 1 1 Config-1 May 01/05 1 1 1CES 1 From the AIDS Menu, you can set:
-<LAST LEG REPORT,
-<PREVIOUS LEGS REPORTS,
-<LRU IDENT,
-<GND SCANNING
-<TROUBLE SHOOT DATA
-<CLASS 3 FAULTS,
-<TEST,
-<GROUND REPORT,
-<SOFTWARE LOAD STATUS.
(1) <LAST LEG REPORT
R (Ref. Fig. 035) If you push the '<LAST LEG REPORT' LSK, the screen shows each class 1 and 2 failure detected during the last flight leg with:
-
The time when the failure occurred
-
The ATA number of the component
-
The FIN of the component
-
The class of the failure.
The screen shows a maximum of two failures at a time. If there are
more failures, push the next page key on the MCDU keyboard. If there
are no failures, the display shows the 'NO FAULT DETECTED' message.
If you push the LSK adjacent to the failure class the screen shows
the trouble shooting data for that failure.
(2) <PREVIOUS LEGS REPORT
R (Ref. Fig. 036) If you push the '<PREVIOUS LEGS REPORT' LSK, the display shows each failure that has not been corrected from previous reports with:
-
The aircraft tailnumber
-
The flight leg
-
The date of the applicable flight leg
-
The time the failure occured
-
The ATA reference of the failure,
-
The class of the failure,
-
The FIN of the component. The display shows a maximum of two failures at a time. If there are more failures, push the next page key on the MCDU keyboard. If there are no failures, the display shows the message NO FAULT DETECTED. In case of an aircraft tailnumber change (e.g the DMU has moved to an other aircraft - internal fault messages are not cleared) the fault messages with different tail number are displayed on the next pages. If you push the LSK adjacent to the failure class the display shows the trouble shooting data for the failure.
1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page A40 1 1 Config-1 May 01/05 1 1 1CES 1
Last Leg Report R Figure 035
1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page A41 1 1 Config-1 May 01/05 1 1 1CES 1
Previous Legs Reports R Figure 036
1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page A42 1 1 Config-1 May 01/05 1 1 1CES 1
(3) <LRU IDENT
R
R
R
R
(Ref. Fig. 037)
If you push the '<LRU IDENT' LSK, the display shows the applicable
LRU identification with:
-
The name of the LRU
-
The LRU partnumber
-
The LRU serial number
-
The combined setup database/customer version partnumber.
(4)
<GND SCANNING (Ref. Fig. 038) If you push the '<GND SCANNING' LSK, the display shows the GND SCAN IN PROGRESS legend. If there are failures in the system the screen shows:
-
The time when the failure occurred
-
The ATA reference of the failure
-
The class of the failure
-
The FIN of the component.
The display shows a maximum of two failures at a time. If there are
more failures, push the next page key on the MCDU keyboard. If there
are no failures, the display shows the message NO FAULT DETECTED.
If you set the <RETURN function key the system deletes all the
recorded failures.
If you push the failure class LSK the screen shows the trouble
shooting data for the failure.
(5)
<TROUBLE SHOOT DATA (Ref. Fig. 039) If you push the '<TROUBLE SHOOT DATA' LSK, the screen shows:
-
The date when the failure occurred
-
The time when the failure occurred
-
The failure type
-
The failure class
-
The count of failure occurrence
-
The failure message
-
The port number
-
The bus name
-
The equipment code
-
The system number.
If there are no trouble shooting data, the display shows 'NO
TROUBLESHOOTING DATA AVAILABLE'
(6)
<CLASS 3 FAULTS (Ref. Fig. 040) If you push the '<CLASS 3 FAULTS' LSK, the display shows each class 3 failure detected during the last flight leg with:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 3(44)
