The number of parameter conditions per logic tree is variable, as long as 200 lines of 76 charcters. Parameter conditions are accomodate Numerical Parameters, Discrete Parameters and Hex Parameters. In case of Numerical Parameters the result of the parameters condition are determined by a numerical composition, which results in either of the results 'TRUE' and 'FALSE'.
(6) Report Output AIDS reports are retrieved by several different output devices (Printer, ACARS Down Link, MDDU).
R 1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page 54 1 1 Config-1 May 01/05 1 1 1CES 1
(7)
Output Rule For each AIDS report it is possible to program the applicable output rule via GSE. It is also possible via GSE to define an individual output rule for each type of trigger condition of a report, which is identified by the 4 digit trigger code.
(a)
Output Rule No. 1.1 The report is stored in the non-volatile report buffer until there is a request for retrieval (e.g. print out, dump on PDL disk, ACARS downlink). After retrieval independent of selected output device the report is marked for deletion.
(b)
Output Rule No. 2.1 The report is stored in the non-volatile report buffer. As soon as the printer is ready to accept data, the report is printed out and marked for deletion.
(c)
Output Rule No. 2.2 The report is stored in the non-volatile report buffer and printed out as the end of flight. After printout, the report is marked for deletion.
(d)
Output Rules No. 3.X The report is stored in the non-volatile report buffer. As soon as the ACARS MU accept the data report is marked for deletion.
(8)
Report Format Definitions
(a) Value Presentation The presentation of the values in the reports is according to the operational range as listed in the parameter list.
E.g. GW = 80000 Kg is printed as 80000.
Negative values begin with an 'N'. For positive values the 'N' is
replaced by an '0' or a digit.
E.g EGT = -55.0 deg. C is printed out as N550,
EGT = +42.5 deg. C is printed out as 0425. If there are more digits shown in the report layout than the number of digits shown in the parameter list then leading zeroes are included.
E.g. LCIT = 80 deg. C is printed as 0080,
LCIT = -70 deg. C is printed as N070. A report parameter which is invalid or not updated is replaced with '_' or 'X' characters.
R 1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page 55 1 1 Config-1 May 01/05 1 1 1CES 1
(9) Definition of Engine Hours (EHRS) EHRS = time between "Main Landing Gear (LH and RH) Compressed/Decompressed". The EHRS is set to zero when an engine serial number change is recognized.
(10)
Definition of Engine Cycle (ECYC)
ECYC = each climb = 1 ECYC
ECYC is incremented by one each time PH 5 is reached.
The ECYC is set to zero when an engine serial number change is
recognized.
(11)
Definition of Engine Running Time (ERT)
ERT = parameter 7C.1.050.01 engine 1 parameter 7C.2.050.10 engine 2
J. Standard Header for Print Reports A standard header to be printed on each report is installed. The header data is taken at the time when the respective report is generated. The following symbols are used for the value fields:
'A' = any character in the range from A..Z,
'1' = digits possible (0, 1),
'9' = any digit in the range from 0..9,
'X' = any character or digit in the range from A..Z
and 0 .. 9,
'.' = checksum.
The content of header is as shown below:
Line 1, 3:
+---------------------------------------------------------------------+ | Value | Content Description | |------------|--------------------------------------------------------| | | The content is freely programmable to enable air-| | | line specific messages. | +---------------------------------------------------------------------+
Line 8, 10:
R 1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page 56 1 1 Config-1 May 01/05 1 1 1CES 1 +---------------------------------------------------------------------+ | Value | Content Description | |--------------|------------------------------------------------------| | ACID | Aircraft Identification (Tail Number) | | XXXXXXX | param. 17.1.301.00 character 1, 2, 3 | | | param. 17.1.302.00 character 4, 5, 6 | | | param. 17.1.303.00 character 7 | |--------------|------------------------------------------------------| | DATE | DATE (Month/Day) | | AAA99 | 01=JAN, 02=FEB, 03=MAR, 04=APR, 05=MAY, 06=JUN, | | | 07=JUL, 08=AUG, 09=SEP, 10=OCT, 11=NOV, 12=DEC | | | param. 17.1.260.00 | |--------------|------------------------------------------------------| | UTC | Universal Time Coordinated (Hours/Minutes/Seconds) | | 999999 | param. 17.1.150.000 | |--------------|------------------------------------------------------| | FROM TO | Identification of City Pair | | AAAA AAAA | param. 01.1.040.XX character 1, 2, 3 of FROM | | | 01.2.040.XX | | | param. 01.1.041.XX fourth character of FROM, 1 | | | char. blank, first char. of TO | | | 01.2.041.XX | | | param. 01.1.042.XX character 2, 3, 4 of TO | | | 01.2.042.XX | |--------------|------------------------------------------------------| | FLT | Flight Number (actual) | | XXXX | param. 01.1.233.00 characters 1, 2 | | | 01.2.233.00 | | | param. 01.1.234.00 characters 3, 4 | | | 01.2.234.00 | | | param. 01.1.235.00 characters 5, 6 | | | 01.2.235.00 | | | param. 01.1.236.00 characters 7, 8 | | | 01.2.236.00 | |--------------|------------------------------------------------------| | PH | DMU Flight Phase | | 99 | Phase: 01, 1.1, 02, 03, 04, 05, 5.1, 06, 07, 7.1, | | | 08, 09 and 10 | |--------------|------------------------------------------------------| | CNT | Report Counter and Previous Report Number | | 99999 | | |--------------|------------------------------------------------------| | CODE | Code number for the respective trigger condition | | 9999 | | |--------------|------------------------------------------------------| | BLEED STATUS | Discrete and numeric coded information | | | 99 1111 1 1111 99 |
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 3(25)
