• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-25 12:14来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page B39 1 1 Config-2 Aug 01/05 1 1 1CES 1


 -----------------------------------------------------------------------------
| Scratchpad Message | Reason | |------------------------|--------------------------------------------------| | | Manual Dump Disk has been inserted | |------------------------|--------------------------------------------------| | DISK SPACE: XXXX KBYTE | - Remaining Disk space after successful SAR | | | channel dump | |------------------------|--------------------------------------------------| | NOT TRANSMITTED TO | - Unsuccessful dump attempt --> Dump aborted | | MDDU | | |------------------------|--------------------------------------------------| | SAR X DUMP ABORTED | - Not all files of the selected SAR channel have | | | been successfully dumped --> Dump aborted | |------------------------|--------------------------------------------------| | FILE DUMP IN PROGRESS | - After dump initialization until completion | | | of file dump | -----------------------------------------------------------------------------
(9) Manual Request of SAR Recording (Ref. Fig. 074) The AIDS Manual SAR-Recording menu allows a manual start/stop control of the SAR recording through the MCDU. The manual start/stop control is independent from the GSE programmed automatic trigger conditions. Access:
 -
Set AIDS on the MCDU main menu

 -
Set MAN REQST SAR/RECRDNG on the AIDS menu.


 Selection:
R - Push the line select key adjacent to the START indication of the
R related SAR channel to initiate SAR recording manually.
R - Push the line select key adjacent to STOP indication of the running
R SAR channel to finish the recording manually.
 Display:
 Below the menu title line the available SAR channels are listed.
 Each listed SAR channel contains:

 -Title (or message CHANNEL NOT ASSIGNED),

 -SAR channel number and

 -Run/Stop status indication.
 Adjacent to the left line select keys the START or STOP indication
 shows to initiate the related SAR recording function.
 Behind the SAR channel numbers the current start/stop indications
 (green) show:

 -STOPPED : The channel is inactive (neither manually nor automatically triggered).
 -RUNNING : The channel is active (neither manually or automatically triggered).
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page B40 1 1 Config-2 Aug 01/05 1 1 1CES 1


 AIDS - Manual Request of SAR Recording
 Figure 074

R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page B41 1 1 Config-2 Aug 01/05 1 1 1CES 1


 (10) DAR Recording Menu
 (Ref. Fig. 075)
 The AIDS Manual Request for DAR Recording menu allows a manual
 start/stop control of the DAR recording through the MCDU. The menu is
 available if a DAR is installed in the aircraft. The manual
 start/stop control is independent from the GSE programmed automatic
 trigger conditions.
 Access:
 - Set AIDS on the MCDU main menu
 - Set DAR RECRDNG on the AIDS menu.
 Selection: 
R  - Push the line select key adjacent to the MANUAL START indication 
R  (1L) to initiate DAR recording manually. 
R  - Push the line select key adjacent to the MANUAL STOP indication 
R  (1L) to finish the recording manually. 
R  - Push the line select key adjacent to the DISPLAY indication (1R) to 
R  get access to the AIDS DAR MONITOR menu. 
R  - On the DAR monitor menu enter a word number into the scratchpad and 
R  push the line select key (1L), (2L), (3L), (4L) or (5L) to display 
R  the appropriate data.
 Display:
 Below the title line the current start/stop status indication (green)
 shows:
 - STOPPED : The channel is inactive (neither manually nor
 automatically triggered).
 - RUNNING : The channel is active (neither manually or automatically
 triggered).
 Adjacent to the left line select key (1L) the MANUAL START or MANUAL
 STOP indication shows to initiate the DAR recording function.
 In addition the data of history time, recorder speed and data
 encoding show.
 P. MCDU AIDS Access Levels
 All FDIMU functions, which can be manually activated by the user via the
 MCDU are protected by a user access control mechanism based on passwords.
 Security users identify themselves to the FDIMU by entering a password in
 the SPECIAL FUNCT/REPROGRAMMING menu. No password entry is necessary to
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM 指示/记录系统 3(113)