12-21-21
ALL ú ú 01 Page 302 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
ANTIROTATION BOLT
BOLT UNDERCUT
BOLT SHANK
A
LOCK LINK
A
LOCK BOLT
BMS 3-27
LOCK LINK/LOCK BOLT
(3 LOCATIONS) 3 POINTS 3 4 5 A-A 13
ANTIROTATION BOLT
BOLT UNDERCUT
BOLT SHANK
LOCK BOLT
BMS 3-27
LOCK LINK (3 LOCATIONS) 34 5
LOCK LINK/LOCK BOLT 3 POINTS A-A 12
3 WARNING:_______ USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27 (MASTINOX 6856K). IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
4 CAUTION:_______ REMOVE UNWANTED MASTINOX FROM SURFACES WHICH WILL BE LUBRICATED. IF YOU APPLY MASTINOX TO JOINTS THAT TURN, FAILURE OF THE LANDING GEAR TO EXTEND OR RETRACT CAN OCCUR.
5 APPLY BMS 3-27 (MASTINOX 6856K) TO BOLT UNDERCUT, SHANK, THREAD RELIEF AND THREADS, FILLING ANY INTERNAL VOIDS IN THE IMMEDIATE AREA.
12 AIRPLANES WITH BUSHINGS
13 AIRPLANES WITHOUT BUSHINGS
Nose Landing Gear Lubrication
Figure 301 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-21
ALL ú ú 01 Page 303 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500
MAINTENANCE MANUAL
SHOCK STRUT OUTER CYLINDER
COLLAR/BEARING
B
BOLT
BOLT UNDERCUT
AFT STEERING
COLLAR
STEERING
CYLINDER
B
BOLT
ROD END
BOLT SHANK
BMS 3-27 (3 LOCATIONS)BEARING/
3 4
OUTER
CYLINDER
FORWARD STEERING COLLAR BEARING BUSHING
BMS 3-27
(1 LOCATION)
3 4 6 BEARING/COLLAR
STEERING COLLAR
4 POINTS B-B
3 WARNING:_______ USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27 (MASTINOX 6856K). IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
4 _______CAUTION: REMOVE UNWANTED MASTINOX FROM SURFACES WHICH WILL BE LUBRICATED. IF YOU APPLY MASTINOX TO JOINTS THAT TURN, FAILURE OF THE LANDING GEAR TO EXTEND OR RETRACT CAN OCCUR.
6 APPLY BMS 3-27 (MASTINOX 6856K) TO ALL MATING SURFACES OF FWD AND AFT COLLAR HALVES INCLUDING ABUTMENT FACES AND BUSHING OUTER DIAMETER, BETWEEN BEARING AND OUTER CYLINDER, TO ROD ATTACH BOLT INSIDE FLANGE FACE, UNDERCUT, SHANK, THREAD RELIEF AND THREADS. FILL ANY INTERNAL VOIDS IN THE AREAS DISCRIBED ABOVE.
Nose Landing Gear Lubrication
Figure 301 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-21
ALL ú ú 01 Page 304 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500
MAINTENANCE MANUAL
C
C
TRUNNION PIN
'B'
'A'
TRUNNION PIN
CROSSBOLT HOLE
BMS 3-27
(1 LOCATION) 34
TRUNNION PIN
1 POINT C-C
3 WARNING:_______ USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27 (MASTINOX 6856K). IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
4 _______CAUTION: REMOVE UNWANTED MASTINOX FROM SURFACES WHICH WILL BE LUBRICATED. IF YOU APPLY MASTINOX TO JOINTS THAT TURN, FAILURE OF THE LANDING GEAR TO EXTEND OR RETRACT CAN OCCUR.
7 APPLY BMS 3-27 (MASTINOX 6856K) FROM POINT 'A' TO POINT 'B' AROUND ENTIRE CIRCUMFERENCE OF TRUNNION PIN, FILLING ANY INTERNAL VOIDS IN THE IMMEDIATE AREA.
Nose Landing Gear Lubrication
Figure 301 (Sheet 5)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 SERVICING(92)
