(2)
AMM 27-62-51/501, Ground Spoiler Interlock Valve Cable
C. Access
(1) Location Zone
410 Right Main Landing Gear
D. Fully Lubricate the Cable
S 023-011
(1)
Remove the flexible cable from the cable sleeve (AMM 27-62-51/401).
S 643-012
(2)
Lubricate the cable:
(a)
Apply a large quantity of grease to the full length of the cable.
(b)
Apply grease to the surfaces of the swivel tubes and the guide tubes.
S 423-013
(3)
Install the flexible cable (AMM 27-62-51/401).
S 713-014
(4)
Make sure the cable moves freely in the sleeve:
(a)
Make sure the bolt that attaches the lower rod end is not installed.
(b)
Move the cable through its full travel a minimum of six times.
(c)
Make sure the force necessary to push the cable is less than
18.0 pounds.
(d)
Make sure the force necessary to extend the cable is less than
15.0 pounds.
(e)
If the cable does not move in these limits, replace the cable.
(5)
Remove the unwanted grease from the top end of the cable.
S 163-015
NOTE: Keep a large quantity of grease on all parts in the boot.
____
S 413-016
(6) Install the protective boot on the lower end of the cable.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-22-81
ALL ú ú 03 Page 303 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 433-017
(7)
Install the bolt that attaches the lower rod end.
S 823-018
(8)
Do the adjustment and test of the cable (AMM 27-62-51/501).
S 723-036
(9)
Do the functional test of the landing gear safety sensors (AMM 32-09-01/501).
TASK 12-22-81-603-026
4. Ground Spoiler Interlock Valve Cable Ends Lubrication (Fig. 302)
_____________________________________________________
A. Consumable Materials
(1) D00012 Silicone Grease DC-33
B. References
(1) AMM 27-62-51/501, Ground Spoiler Interlock Valve Cable
C. Access
(1) Location Zone
410 Right Main Landing Gear
D. Lubricate the Ends of the Cable
S 033-027
(1)
Remove the bolt that attaches the lower rod end to the landing gear.
S 013-028
(2)
Remove the protective boot from the lower end of the cable.
S 643-029
(3)
Lubricate the ends of the cable:
(a) Apply grease to the fittings at the two ends of the cable.
NOTE: Some grease can come out of the outer surface of the
____
cable.
(b) Apply grease to the surfaces of the swivel tubes and the guide tubes.
S 733-034
(4) Make sure the cable moves freely in the sleeve:
(a)
Make sure the bolt that attaches the lower rod end is not installed.
(b)
Move the cable through its full travel a minimum of six times.
(c)
Make sure the force necessary to push the cable is less than
18.0 pounds.
(d)
Make sure the force necessary to extend the cable is less than
15.0 pounds.
(e)
If the cable does not move in these limits, fully lubricate the cable.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-22-81
ALL ú ú 01 Page 304 ú Mar 12/00
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 SERVICING(116)
