OUTBD
FWD
1 POINT
1 CAUTION: THE GREASE GUN MUST NOT EXCEED 400 PSI WHEN YOU
A
LUBRICATE THE MAIN GEAR TRUNNION BEARING. HIGHER RESSSURE MAY CAUSE STRUCTURE DAMAGE.
2 MIL-G-21164 OR MIL-G-3827 IS OPTIONAL TO BMS 3-33
Landing Gear Support Beam Lubrication Figure 301
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-25-07
ALL ú ú 03 Page 301 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
AFT ENTRY DOOR LUBRICATION
__________________________
1. General_______
A. This procedure contains two tasks:
(1)
The lubrication of the aft entry door.
(2)
The lubrication of the handle on the aft entry door.
TASK 12-25-11-603-001
2. Aft Entry Door Lubrication__________________________
A. Special Tools and Equipment
(1) Lubrication Set - Entry, Cargo, Service and Galley Door Camshaft Bearings - F72942-1
NOTE: Use the set to lubricate fittings where access is not easy.
____
(2) Maintenance Stand
B. Standard Tools and Equipment
(1)
Flush gun (grease gun)
(2)
Oil squirt can
C. Consumable Materials
(1)
D00013 Grease - MIL-G-23827
(2)
D00091 Oil - MIL-L-7870
D. References
(1)
AMM 25-61-35/201, Escape Slide Assembly (Door Mounted)
(2)
AMM 52-13-21/401, Aft Entry Door Lining and Insulation
E. Access
(1)
Location Zone
110 Aft Entry Door
(2)
Access Panel
4601L Aft Entry Door
F. Procedure
S 843-007
(1) Prepare to lubricate the door.
(a)
Remove the escape slide assembly (AMM 25-61-35/201).
(b)
Remove the lining from the door (AMM 52-13-21/401).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-25-11
ALL ú ú 01 Page 301 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(c)
Remove the lining from the gates.
(d)
Remove the plate from the handle mechanism.
S 643-006
(2)
Lubricate the door (Fig. 301).
S 843-008
(3)
Put the door in a serviceable condition.
(a)
Install the plate on the handle mechanism.
(b)
Install the linings on the gates.
(c)
Install the lining on the door (AMM 52-13-21/401).
(d)
Install the escape slide assembly on the door (AMM 25-61-35/201).
TASK 12-25-11-603-005
3. Aft Entry Door Handle Mechanism Lubrication___________________________________________
A. Special Tools and Equipment
(1) Lubrication Set - Entry, Cargo, Service and Galley Door Camshaft Bearings - F72942-1
NOTE: Use the set to lubricate fittings where access is not easy.
____
(2) Maintenance Stand
B. Standard Tools and Equipment
(1) Flush gun (grease gun)
C. Consumable Materials
(1) D00013 Grease - MIL-G-23827
D. References
(1)
AMM 25-61-35/201, Escape Slide Assembly (Door Mounted)
(2)
AMM 52-13-21/401, Aft Entry Door Lining and Insulation
E. Access
(1)
Location Zone
110 Aft Entry Door
(2)
Access Panel
4601L Aft Entry Door
F. Procedure
S 843-009
(1)
Prepare to lubricate the door.
(a)
Remove the escape slide assembly (AMM 25-61-35/201).
(b)
Remove the lining from the door (AMM 52-13-21/401).
(c)
Remove the plate from the handle mechanism.
中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：737-300 400 500 AMM 飞机维护手册 SERVICING(118)
