(c)
Repair or replace any bracket assemblies that are damaged.
S 214-012
(3)
Examine the finish on the structure that touches the door.
(a)
See that the abrasion-resistant finish is satisfactory.
(b)
Apply an abrasion-resistant finish that is 0.010 inch thick if it is necessary (Ref 51-24-04/701).
S 714-013
(4)
Do a check of the latch adjustment.
(a)
Close but do not latch the door.
(b)
Push at the latch until the door aligns with the fuselage between -0.02 and +0.02 inch.
(c)
Lock the latch.
(d)
Make sure you can push the latch bolt up from 0.01 to 0.03 inch. 1) Change the shim below the face of the latch if it is
necessary to get this dimension.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-49-07
ALL ú ú 04 Page 403 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
(e) Make sure the latch has a minimum overlap of 0.31 inch.
(5) S 224-014Examine the clearances around the door. (a) Make sure there is from 0.00 and 0.06 inch between the edges of the door and the fuselage. (b) Remove material from the door if it is necessary to get the correct dimension. (c) If you remove material, paint the area with Alodine (Ref 51-21-04/701).
(6) S 224-015See that the door aligns with the fuselage in less than 0.02 inch.
(7) S 724-016Open and close the door to make sure it operates correctly.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-49-07
ALL ú ú 04 Page 404 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
UNDERWING FUEL DRAIN DOOR - INSPECTION/CHECK
____________________________________________
1. General_______
A. This procedure contains this task:
(1)
An inspection of the latch plate on the door of the fuel drain to make sure the parts are not worn
B.
The underwing fuel drain door must be opened to perform the
inspection/check.
TASK 52-49-08-206-001
2. Examine the Underwing Fuel Drain Door for Wear______________________________________________(Fig 601)
A. References
(1)
IPC 52-49-08, Fig. 1
B.
Access
(1)
Location Zone
133 Air Conditioning Equipment Bay, LH
134 Air Conditioning Equipment Bay, RH
(2)
Access Panel 191GL Door - Access, Fuel Drain and Dripstick, LH 192GR Door - Access, Fuel Drain and Dripstick, RH
C.
Procedure
S 016-002
(1)
Open the door to the fuel drain below the wing.
S 226-003
(2)
Do a check of the wear limits for the latch plate on the door.
(a)
Measure the parts as necessary and compare the measured dimensions to the limit dimensions.
(b)
If the part does not have the correct tolerance, replace it or repair it as necessary.
(3)
Close the door to the fuel drain under the wing.
S 416-004
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-49-08
ALL ú ú 01 Page 601 ú Oct 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
SEE A
A
A
A
1. LATCH PLATE
A-A
DESIGN LIMITS
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 舱门 DOORS 4(60)
