• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-15 08:31来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

The third task is the removal of the cargo door hook pin.

 (4)  
The fourth task is the installation of the cargo door hook pin.


 TASK 52-34-24-024-027
 2. Remove the Cargo Door Pull-In Hook
__________________________________
 A. References
 (1)  
AMM 52-34-00/001, Forward/Aft Cargo Doors

 (2)  
AMM 52-34-00/801, Forward/Aft Cargo Doors - Approved Repairs

 B.
Equipment

 (1)  
4MIT65B04308 Cargo Door Mechanism Torque Adapter

 C.
Access

 (1)  
Location Zone 122 Forward Cargo Container Compartment, Forward Half 142 Aft Cargo Container Compartment

 (2)  
Access Panel
 821R Door - Forward Cargo Compartment
 821AR Cargo Door Maintenance Access Panel
 821FR Cargo Door Maintenance Access Panel
 822R Door - Aft Cargo Compartment
 822AR Cargo Door Maintenance Access Panel
 822FR Cargo Door Maintenance Access Panel


 D.
Procedure


 S 864-014
 (1)  
Electrically open the cargo door to get access to the pull-in hook (1) (AMM 52-34-00/001).

 S 864-015

 (2)  
Open the circuit breakers for the applicable cargo door as follows:

 (a)  
P59 Aft Equipment Panel
 1) AFT CARGO DOOR POWER UNITS


 (b)  
Power Distribution Center - Left
 1) LOWER CARGO DOOR FWD
 2) CARGO DOOR CONTROL FWD
 3) CARGO DOOR CONTROL AFT

 

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-34-24
 ALL  ú ú 01 Page 401 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 014-022
 (3)  If you use the cargo door mechanism torque adapter tool to remove the hook, remove the applicable cargo door maintenance access panel.
 NOTE: The cargo door maintenance access panels are located on the
____ door skin, outboard of the bellcrank (4).
 S 014-021
 (4)  
If you do not use the cargo door mechanism torque adapter tool to remove the hook, remove the lower door lining (Fig. 401).

 S 354-017

 (5)  
Drill the rigging pin holes in the hook support fittings if it is necessary (AMM 52-34-00/801).

 S 024-004

 (6)  
Remove the bellcrank (4) from the pull-in hook (1).

 S 354-018

 (7)  
Bend up the tabs on the tab-type washer (2).

 S 034-005

 (8)  
Remove the nut (3).

 S 034-006

 (9)  
Remove the tab-type washer (2).

 S 034-007

 (10)
 Remove the flat washer (8).

 S 024-008

 (11)
 Remove the cargo door pull-in hook (1) from the door.


 TASK 52-34-24-424-026
 3. Install the Cargo Door Pull-In Hook
___________________________________
 A. References
 (1)  
AMM 52-34-00/001, Forward/Aft Cargo Doors

 (2)  
AMM 52-34-00/501, Forward/Aft Cargo Doors

 B.
Equipment

 (1)  
4MIT65B04308 Cargo Door Mechanism Torque Adapter

 C.
Access

 (1)  
Location Zone 122 Forward Cargo Container Compartment, Forward Half 142 Aft Cargo Container Compartment


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-34-24
 ALL  ú ú 01 Page 402 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  
Access Panel
 821R Door - Forward Cargo Compartment
 821AR Cargo Door Maintenance Access Panel
 821FR Cargo Door Maintenance Access Panel
 822R Door - Aft Cargo Compartment
 822AR Cargo Door Maintenance Access Panel
 822FR Cargo Door Maintenance Access Panel


 D.
Procedure


 S 864-050
 (1)  
Put the pull-in hook (1) in position in the door.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 舱门 DOORS 4(3)