S 794-033
S 584-034
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-41
ALL ú ú 02 Page 406 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
MAIN LANDING GEAR LOWER DRAG STRUT - INSPECTION/CHECK
_____________________________________________________
1. General
_______
A. This procedure only has illustration and a wear limits table which shows the data for wear limits. There are no procedures for the access, the removal, or the installation of the parts. Refer to the Main Landing Gear Lower Drag Strut - Removal/Installation for procedures to do these tasks.
TASK 32-11-41-206-001
2. Wear Limits for the Lower Drag Strut of the Main Landing Gear (Fig. 601)
_____________________________________________________________
A. Wear Limits for the Lower Drag Strut
S 226-002
(1) Refer to Fig. 601 for the inspection points and the wear limits table.
Main Landing Gear Lower Drag Strut Wear Limits
Figure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-41
ALL ú ú 01 Page 601 ú Nov 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
C-C Main Landing Gear Lower Drag Strut Wear Limits Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-41
ALL ú ú 01 Page 602 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
NO. INDEX PART NAME DIM. DESIGN LIMITS WEAR LIMITS WORN PART REPLACE PART WORN REPAIR INSTR REPAIR
DIAMETER PER-MITTED WEARDIM. DIA MAX ANCE CLEAR-
MIN MAX
1 BUSHING ID 1.500 1.501 1.503 0.005 X
BOLT OD 1.498 1.499 1.497 X 1
2 BUSHING ID 1.500 1.501 1.503 0.005 X
BOLT OD 1.498 1.499 1.497 X 1
3 BUSHING ID 1.7505 1.7515 1.7535 0.005 X
PIN OD 1.7495 1.7500 1.7485 X 1
4 BUSHING ID 1.7505 1.7515 1.7535 0.005 X
PIN OD 1.7495 1.7500 1.7485 X 1
5 BUSHING ID 1.7510 1.752 1.7535 0.005 X
PIN OD 1.7495 1.7500 1.7485 X 1
6 BUSHING ID 1.501 1.502 1.503 0.005 X
BOLT OD 1.499 1.500 1.498 X 1
7 BUSHING ID 2.257 2 2.258 2 2.260 0.010 X
BOLT OD 2.251 2.252 2.250 X 1
8 BUSHING ID 1.375 1.376 1.378 0.005 X
BOLT OD 1.373 1.374 1.372 X 1
9 BUSHING ID 1.375 1.376 1.378 0.005 X
BOLT OD 1.373 1.374 1.372 X 1
10 BUSHING 3 1.626 1.627 1.632 0.008 X
BUSHING 4 1.624 1.625 1.619 X
11 BUSHING 5 3.625 3.627 3.632 0.008 X
BUSHING 3 3.623 3.624 3.619 X
12 BUSHING 6 6.377 6.378 6.382 0.011 X
BUSHING 5 6.375 6.376 6.371 X
13 CLEARANCE TOTAL AXIAL -- 0.010 0.016 -- 0.020 9
14 BUSHING 5 3.687 3.688 3.691 0.008 X
BUSHING 8 3.684 3.686 3.680 X
Main Landing Gear Lower Drag Strut Wear Limits 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：737-300 400 500 AMM 飞机维护手册 起落架 LANDING GEAR 1(87)
