737-300 400 500 AMM 飞机维护手册 起落架 LANDING GEAR 1(126)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 TASK 32-13-11-024-046
 2.  Shock Strut Door Assembly Removal (Fig. 401)_________________________________
 A.  References
 (1)  
AMM 32-00-01/201, Ground Lock Assemblies

 B.  
Access

 (1)  
Location Zones
 310 Left Main Landing Gear
 410 Right Main Landing Gear

 C.  
Shock Strut Door Assembly Removal

 S 494-001
 (1)  
Make sure to install the ground lock assemblies in all the landing gears (AMM 32-00-01/201).

 S 034-002

 (2)  
Remove the attached bolts to disconnect the control rod assembly (7) for the inner door.

 S 034-003

 (3)  
Remove the nuts, washers, and bolts to disconnect the upper (3) and the lower (5) door supports of the drag strut from the clamps (1 and 4).

 S 824-004

 (4)  
Hold the strut door assembly.

 (a)  
Remove the cotter pins, nuts, washers and bolts to disconnect the upper shock strut door support (10) from the clamp (11).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-11
 ALL  ú ú 01 Page 401 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
10. UPPER SHOCK  STRUT DOOR
SEE A 1. CLAMPSUPPORT SEE B11. CLAMP 3. UPPER DRAG STRUT
 DOOR SUPPORT SEE D
1 16.17

1 19.15

4. CLAMP
9. CLAMP
5. LOWER DRAG STRUT  DOOR SUPPORT
1  11.65 HINGE SEE E
8. LOWER SHOCK STRUT DOOR SUPPORT
1 30.02
SEE C
6. CONTROL
 ROD SUPPORT SEE F
7. ADJUSTABLEEND OF SHOCK STRUT CONTROLOUTER CYLINDER ROD
INBD FWD
A
OUTER DOOR
DOOR STOP
CENTER
DOOR

0.50 (|0.10) INCH 1 DIMENSIONS FOR INITIAL POSITIONING0.10 (|0.04/0.00) INCH FWD OF DOOR SUPPORT CRADLES ON LANDING GEAR STRUCTURE
B
Main Gear Shock Strut Door Installation
Figure 401 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-13-11
 ALL  ú ú 01 Page 402 ú Oct 25/84
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SILICONE 
TEE BOLTS  RUBBER STRIP 
SILICONE 
RUBBER STRIP 
9. CLAMP 
12. ADJUSTABLE
SHIMS  LINK 

9. SHOCK STRUT DOOR SUPPORT  SUPPORT ROD 
MOUNTING SCREWS (4 PLACES)  BOLT  1. CLAMP 
CENTER DOOR  NUT  ROD END ATTACHMENT BOLT 
ROD ATTACHMENT  DRAG STRUT DOOR SUPPORT 
D 
C  INBD  FWD 

CENTER DOOR
BOLT
INNER DOOR COTTER PIN ATTACHMENT BOLT NUT
7. ADJUSTABLE ROD
WASHER
INNER DOOR CONTROL ROD ASSEMBLY INNER DOOR HINGE F E
Main Gear Shock Strut Door Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 起落架 LANDING GEAR 1(126)