E. Access
(1)
Location Zones
221 Control Cabin - Left
222 Control Cabin - Right
310 Fuselage - Station 2360 to Station 2792
(2)
Access Panels
317AL APU Access Door - Left
318AR APU Access Door - Right
F.
Procedure
S 422-096
CAUTION: REMOVE THE PROTECTION COVERS FROM THE OPENINGS AS NECESSARY.
_______ IF YOU DO NOT REMOVE THE PROTECTION COVERS, DAMAGE TO THE APU CAN OCCUR.
(1)
Do these steps to install the inlet screen and spring assembly (11):
(a)
Lubricate the packing (15) with a light coat of lubricant or oil.
(b)
Use the packing assembly tool (217024-7) or an equivalent tool to install the packing (15) on the inlet screen cover (14).
(c)
Install the inlet screen and spring assembly (11) in the inlet screen cover (14).
(d)
Install the inlet screen cover (14) and inlet screen and spring assembly (11) in the inlet screen port of the fuel pump. 1) Tighten the inlet screen cover (14) to 125-150 inch-pounds
(14.1-17.0 newton-meters).
(e)
Lubricate the new packing (12) with a light coat of lubricant or oil.
(f)
Use the packing assembly tool (100-48189-2) or an equivalent tool to install the packing (12) on the plug (13).
(g)
Install the plug (13) on the inlet screen cover (14).
1) Tighten the plug (13) to 33-45 inch-pounds (3.7-5.1 newton-meters).
(h)
Install the lockwire on the plug (13) and inlet screen cover (14).
G.
Fuel Pump Inlet Screen Installation Test
S 862-078
(1)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:
(a)
P6-2 Main Power Distribution Panel
1) 6K18, APU ALTN CONT
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
49-31-00
ALL ú ú 05 Page 205 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
(b) P83 Aft APU Equipment Control and Circuit Breaker Panel 1) APU PRIME CONT
S 862-079
(2)
Remove the DO-NOT-OPERATE tag from the APU control switch on the P5 overhead panel.
S 792-112
(3)
Do the installation test for the inlet screen and spring assembly:
(a)
Do this task: APU Starting and Operation (AMM 49-11-00/201).
(b)
Operate the APU for a minimum of five minutes.
(c)
During the APU operation, examine the inlet screen cover for signs of fuel leakage.
(d)
If you find fuel leakage, then do these steps to repair the leakage: 1) Do this task: APU Usual Shutdown (AMM 49-11-00/201). 2) Attach a DO-NOT-OPERATE tag to the APU control switch on
the P5 overhead panel. 3) Repair the cause of the fuel leakage. 4) Remove the DO-NOT-OPERATE tag from the APU control switch
on the P5 overhead panel. 5) Do this task: APU Starting and Operation (AMM 49-11-00/201). 6) During the APU operation, examine the inlet screen cover for signs of fuel leakage. 7) If you find fuel leakage, do the leakage repair again.
(e)
If it is not necessary to do other tasks, do this task: APU Usual Shutdown (AMM 49-11-00/201).
H.
Put the Airplane Back to Its Usual Condition
S 412-080
(1)
Close the left APU access door, 317AL, and right APU access door, 318AR:
(a)
Remove the two quick-release pins, disconnect the two hold-open rods and put the two hold-open rods in the two clips on the right access door.
(b)
Install the two quick-release pins in the two brackets on the right APU compartment bulkhead.
(c)
Lift the right access door until you can install the lanyard on the pin at the aft APU compartment bulkhead.
NOTE: The lanyard will hold the right access door on the
____
APU compartment bulkhead.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：747-400 AMM 飞机维护手册 机载辅助动力 2(33)
