• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-14 10:02来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 49-61-10
 ALL  ú ú 01 Page 211 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 APU CURRENT TRANSFORMER - REMOVAL/INSTALLATION
______________________________________________
 1.  General_______
 A.  This procedure has these tasks:
 (1)  
A removal of the APU current transformer

 (2)  
An installation of the APU current transformer.

 B.  
The two APU current transformers are installed behind the bulk cargo compartment and attached to the two brackets on the airplane floor beam. You can get access to the two APU current transformers through the bulk cargo compartment door and access station 2160 bulkhead door.


 TASK 49-61-11-004-020
 2.  APU Current Transformer Removal (Fig. 401)_______________________________
 A.  Access
 (1)  
Location Zones 151 Area Aft of Bulk Cargo Compartment - Left 152 Area Aft of Bulk Cargo Compartment - Right 221 Control Cabin - Left 222 Control Cabin - Right

 (2)  
Access Panels
 146AZ Access Station 2160 Bulkhead Door
 823R Bulk Cargo Compartment Door


 B.  
Prepare for the Removal


 S 864-001
 (1)  
Make sure the APU control switch on the P5 overhead panel is OFF and attach a DO-NOT-OPERATE tag.

 S 864-022

 (2)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P6-2 Main Power Distribution Panel
 1) 6K18, APU ALTN CONT


 (b)  
P83 Aft APU Equipment Control and Circuit Breaker Panel 1) APU PRIME CONT


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-61-11
 ALL  ú ú 01 Page 401 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 014-036
 (3)  
Open the bulk cargo compartment door, 823R.

 S 014-003

 (4)  
Open the access station 2160 bulkhead door, 146AZ.

 C.
APU Current Transformer Removal


 S 024-037
 (1)
Do these steps to remove the APU current transformer (2):

 (a)  
Disconnect the electrical connector (1) from the APU current transformer (2).

 (b)  
Remove the two screws (4) and two washers (5) that attach the lanyard and cover (3) to the APU current transformer (2).

 (c)  
Remove the cover (3).

 (d)  
Remove the two nuts (9), two washers (7) and two screws (6) that attach the two clamps (8) and generator cable to the airframe.

 (e)  
Remove the two clamps (8).

 (f)  
Remove the three nuts (11) and three screws (10) that attach the APU current transformer (2) to the bracket.

 (g)  
Remove the APU current transformer (2).

 (h)  
Make sure you install all necessary protection covers.


 TASK 49-61-11-404-021
 3.  APU Current Transformer Installation (Fig. 401)____________________________________
 A. References
 (1)  AMM 20-22-01/601, Electrical Bonding
 B. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 2 | APU Current Transformer | 49-61-11 | 01 | 15 or | | | | | | | 115 | 2.......….......…...................................…...........…......….......1
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-61-11
 ALL  ú ú 01 Page 402 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400 
MAINTENANCE MANUAL 
ACCESS STATION 2160 
BULKHEAD DOOR, 146AZ 
SEE  B  C 
BULK CARGO 
COMPARTMENT 
DOOR, 823R 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 机载辅助动力 2(131)