EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-01
ALL ú ú C01 Page 427 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 624-085-C00
(11) Fill space between the temperature sensors and the inlet cowl with sealant.
(a) Cut the sealant smooth with the surface.
(b) Let the sealant cure for 4 hours.
NOTE:____ Four hour cure time is based on standard conditions of
77 |2°F (25 |1°C) and 50 |5% relative humidity. Cure
time will change at other conditions.
S 414-086-C00
(12) Close the fan cowl panels (AMM 71-11-02/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-01
ALL ú ú C01 Page 428 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
INLET COWL - INSPECTION/CHECK
_____________________________
1. General
_______
A. This procedure has the one task to examine the inlet cowl for damage.
TASK 71-11-01-206-003-C00
2. Inlet Cowl Inspection
_____________________
A. References
(1)
AMM 71-11-02/201, Fan Cowl Panels
B.
Access
(1)
Location Zones
506 Engine No. 1 - Inlet Cowl
606 Engine No. 2 - Inlet Cowl
LIP SKIN
Inlet Cowl Inspection Figure 601
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-01
ALL ú ú C01 Page 601 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
RUBSTRIP
A-A
Inlet Cowl Rubstrip Inspection/Check
Figure 602
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
71-11-01
ALL ú ú C01 Page 602 ú Nov 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
G17474
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(2)
Access Panels
5737/5746 Engine No. 1 - Fan Cowl Panels
5837/5846 Engine No. 2 - Fan Cowl Panels
C.
Procedure
S 016-001-C00
(1)
Open the fan cowl panels (AMM 71-11-02/201).
S 216-002-C00
(2)
Examine the inlet cowl (Fig. 601) for the damage that follows:
NOTE: If you find damage, refer to the Structural Repair Manual
____
(SRM 54-10-01) for the permitted limits.
(a)
Cracks
(b)
Nicks, gouges, scratches, and corrosion
(c)
Dents
(d)
Holes and punctures
(e)
Delamination (on the inner or outer skin)
(f)
Erosion (on the lip skin)
(g)
Missing/loose fasteners on the lip skin 1) Replace the fastener. 2) It is permitted to operate the airplane with one missing
fastener to get to a maintenance base for the correct fastener installation.
(h)
Measure the thickness of the aft inlet chord at the strut/inlet interface. 1) The minimum permitted thickness of the chord is 0.06 inches
(1.52 mm).
S 216-004-C00
(3) INLET COWLS WITH THE RUBSTRIPS BETWEEN THE INLET AFT CHORD AND THE STRUT FAIRING; Make an inspection of the rubstrips as follows:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 动力装置 POWER PLANT 2(121)
