EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
33-42-41
ALL ú ú 01 Page 502 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
LEFT RUNWAY TURNOFF LIGHT
(THE RIGHT LIGHT IS SYMMETRICAL)
A
Adjustment of the Runway Turnoff Lights
Figure 501
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
33-42-41
ALL ú ú 02 Page 503 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
LOCATION OF THE LIGHT ALIGNER FOR THE LEFT RUNWAY TURNOFF LIGHT
(RIGHT LIGHT IS SYMMETRICAL)
Runway Turnoff Lights (Adjustment with a Light Aligner)
Figure 502 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
33-42-41
ALL ú ú 01 Page 504 ú Jul 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
LIGHT
LIGHT ALIGNER
(BACK VIEW)
SEE A
LIGHT
BEAM
HEIGHT LIGHT BEAM
OF THE
LIGHT
ALIGNER
CENTER OF THE LIGHT BEAM
1
LIGHT
ALIGNER
LIGHT ALIGNER
LIGHT BEAM
CENTER
LIGHT BEAM BEFORE
OF THE
THE ADJUSTMENT
LIGHT BEAM
INDICATOR (13 LOCATIONS)
PHOTOCELL (4 LOCATIONS)
LIGHT BEAM AFTER LIGHT ALIGNER
THE ADJUSTMENT (FRONT VIEW)
1
18 INCHES LESS THAN
A
THE HEIGHT OF THE LIGHT
Runway Turnoff Lights (Adjustment with a Light Aligner)
Figure 502 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
33-42-41
ALL ú ú 01 Page 505 ú Jul 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 435-007
(9) Install the lens for the inboard landing and runway turnoff lights (AMM 33-42-21/401).
S 865-014
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO REMOVE THE
_______ LEADING EDGE FLAP AND SLAT LOCKS CORRECTLY. THE LEADING EDGE FLAPS AND SLATS CAN MOVE QUICKLY IF YOU DO NOT REMOVE THE LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(10)
Do this task: "Leading Edge Flap and Slat Locks Removal" (AMM 27-81-00/201).
S 865-013
(11)
Remove the electrical power if it is not necessary
(AMM 24-22-00/201).
TASK 33-42-41-825-010
3. Runway Turnoff Light - Adjustment with a Target (Fig. 501 and 503)_______________________________________________
A. References
(1)
AMM 08-10-00/201, Leveling
(2)
AMM 24-22-00/201, Manual Control
(3)
AMM 27-81-00/201, Leading Edge Flap and Slat Locks Installation
(4)
AMM 33-42-21/401, Inboard Landing and Runway Turnoff Light Lens Assembly (Cover) - Removal/Installation
B. Access
(1) Location Zone 303 Left Wing Inboard Leading Edge Including Slats 403 Right Wing Inboard Leading Edge Including Slats
C. Procedure
S 865-031
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE LEADING EDGE FLAP AND SLAT LOCKS CORRECTLY. THE LEADING EDGE FLAPS AND SLATS CAN MOVE QUICKLY IF YOU DO NOT INSTALL THE LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(1)
Do this task: "Leading Edge Flap and Slat Locks Installation" (AMM 27-81-00/201).
