737-300 400 500 AMM 飞机维护手册 舱门 DOORS 1(49)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

A 737-300/400/500MAINTENANCE MANUAL
3. HOUSING FOR THE HANDLE MECHANISM
30. O-RING 
FOR THE 
OUTSIDE 
HANDLE
10. NUT 
5. CAM PLATE 
9. WASHER 
RECESS FOR 
OUTSIDE HANDLE 
7. OUTSIDE HANDLE 
8. HANDLE SHAFT 
28. BOLT (4 LOCATIONS) 
29. WASHER
 (4 LOCATIONS) 
CAM PLATE 
A 
Door Hinge Arm Installation 
Figure 401 (Sheet 2) 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-11
 ALL  ú ú B02 Page 403 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
14. FLOATING NUT  (2 ON BOTH ARMS)
13. COVER BRACKET
12. HINGE PIN BOLT (2 ON BOTH ARMS)
11. HINGE SUPPORT IN THE DOOR STRUCTURE
17.
 HINGE PIN

18.
 SLEEVE

2. TORQUE TUBE
18. SLEEVE
17. HINGE PIN
13. COVER  BRACKET
TORQUE TUBE
B
Door Hinge Arm Installation Figure 401 (Sheet 3)
15.
 RETAINER  (2 ON BOTH ARMS)

16.
 HINGE ARM

16. HINGE ARM
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-11
 ALL  ú ú B02 Page 404 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
DOOR STRUCTURE
ACCESS HOLES
27. CONTROL ROD FOR THE BOTTOM GATE
TORQUE TUBE FOR THE TOP GATE
19.
 CONTROL ROD FOR THE TOP GATE

20.
 GATE CRANK

TOP GATE LINKAGE
D

21. HOUSING BOLT (12 LOCATIONS)
19.
 CONTROL ROD FOR
THE TOP GATE

20.
 GATE  CRANK

3. HOUSING FOR THE HANDLE MECHANISM
23. COTTER
22. PUSH ROD PIN
24.
 NUT FOR VERTICAL ADJUSTMENT

25.
 BEARING

26.
 CRANK

2. TORQUE TUBE
HANDLE MECHANISM
NOTE:
C
THE CONTROL ROD FOR THE TOP GATE IS SHOWN. THE CONTROL ROD FOR THE BOTTOM GATE IS EQUIVALENT
Door Hinge Arm Installation
Figure 401 (Sheet 4)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-11
 ALL  ú ú B02 Page 405 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500
MAINTENANCE MANUAL

1.
 HINGE ARM

2.
 HINGE SUPPORT IN THE DOOR STRUCTURE

3.
 HINGE PIN

4.
 SLEEVE

5.
 INSPECTION HOLE

6.
 TORQUE TUBE

7.
 NUT FOR VERTICAL ADJUSTMENT

8.
 PUSHROD

9.
 CRANK

10.
 BEARING

DOOR STRUCTURE
11.
 HINGE SUPPORT IN THE DOOR STRUCTURE

12.
 HINGE ARM

16. O-RING
HOLE FOR COTTER PIN
15. HOUSING FOR THE HANDLE MECHANISM
7. NUT FOR VERTICAL ADJUSTMENT
14. SLEEVE
17. BUSHING IN THE  HINGE FITTINGS
13. HINGE PIN
Door Hinge Arm and Torque Tube Assembly Figure 402
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-11
 ALL  ú ú B02 Page 406 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 034-006-B00
 (5)  Disconnect the torque tube from the hinge pins. (a) Remove the bolts in the torque tube and the hinge pin. (b) Move the sleeves (18) along the torque tube.
 S 034-007-B00
 (6)  Remove the twelve bolts (21) that hold the housing for the handle mechanism (3).
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 舱门 DOORS 1(49)