• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-03 11:38来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 701 Tail Compartment


 (2)  
Access Panels
 1103 Forward Access Door
 1601L Forward Airstair Door
 3304L A/C Access Door
 3404R A/C Access Door
 3303L A/C Access Panel
 3403R A/C Access Panel
 3701 Stabilizer Trim Access Door
 3804 APU Cowl Door


 D.
Procedure


 S 114-005-B00
 (1)  
Clean all the surfaces that touch the seal.

 (a)  
Use a clean cloth and solvent to clean the surfaces.


 S 424-010-B00
 CAUTION:_______BE CAREFUL WHEN YOU INSTALL THE SEAL. IT IS EASY TO CUT THE SEAL OR MAKE A HOLE IN THE SEAL.
 (2)  
Install a seal in a flange.

 (a)  
Put the seal adjacent to the flange.

 (b)  
See that the seal points outboard.

 (c)  
Push one edge of the seal into the flange.

 (d)  
Use the special tool to push the other edge of the seal into the flange.


 NOTE: Liquid soap is a good lubricant for the seal.
____
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-15
 ALL  ú ú B01 Page 403 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (3)  S 424-007-B00Install a seal with an angle. (a) Put the seal adjacent to the angle. (b) Make holes in the seal that align with the angle. (c) Tighten the screws until you see the angle compress the seal.
 (4)  S 864-008-B00Close the door.
 (5)  S 714-009-B00Do this check of the seals. (a) Make sure there is not an overlap where the seals touch. (b) Cut the seals if there is an overlap.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-15
 ALL  ú ú B01 Page 404 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 ACOUSTIC AND THERMO SEALS - REMOVAL/INSTALLATION
________________________________________________
 1.  General_______
 A.  Acoustic and Thermo Seals reduce noise. They also are insulation. Each seal has two parts. The parts come together to make the seal work correctly (Fig. 401).
 B.  Part of the Acoustic and Thermo Seal attaches to the lining of the door. Part of the Acoustic and Thermo Seal attaches to the lining in the door opening.
 C.  This procedure contains two tasks:
 (1)  
The removal of the Acoustic and Thermo Seal

 (2)  
The installation of the Acoustic and Thermo Seal.

 D.  
This procedure refers to the Acoustic and Thermo Seals as "the seal".


 TASK 52-09-16-004-001-B00
 2.  Acoustic and Thermo Seal Installation (Fig. 401)________________________________________________
 A.  Access
 (1)  
Location Zone
 105 Forward Entry Door
 106 Forward Galley Service Door
 110 Aft Entry Door
 112 Aft Galley service Door


 B.  
Procedure


 S 864-002-B00
 (1)  
Open the door sufficiently to remove the seal.

 S 024-003-B00

 (2)
Remove the part of the seal that is on the lining of the door.

 (a)  
Remove the screws that hold the trim to the sides of the door.

 (b)  
Remove the trim.

 (c)  
Remove the bulb-type part of the seal.


 S 024-004-B00
 (3)  
Remove the part of the seal that is on the lining of the door opening.

 (a)  
Hold a piece of the seal.


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-16
 ALL  ú ú B01 Page 401 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 舱门 DOORS 1(23)