737-300 400 500 AMM 飞机维护手册 舱门 DOORS 1(123)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

A
737-300/400/500MAINTENANCE MANUAL
 (c)  Move the door until the holes in the hinge arms align with the holes in the hinge links.
 S 434-016-B00
 (4)  Connect the door to the airplane at the bottom hinge.
 CAUTION: DO NOT LET THE DOOR MOVE TOO MUCH WHILE YOU INSTALL THE
_______ HINGES. YOU CAN CAUSE DAMAGE TO THE HINGES IF YOU LET THE DOOR MOVE TOO MUCH.
 (a)  
If the snubber (18) is attached to the stop link (21), connect the snubber (18) (Fig. 401) to the door: 1) Connect the attach fitting (16) to the hinge support (17)

 with the four bolts.

 (b)  
If the snubber (18) is not attached to the stop link (21), install the snubber: 1) Put the snubber (18) in its correct position in the

 airplane. 2) Make sure the rod end lubrication fittings on the snubber
 (18) are inboard. 3) Install the bolts (23) and washers (24) to attach the attach fitting (16) to the hinge support (17).
 4)  Install the snubber bolt (22), washer (20) and nut (19) to attach the snubber (18) to the stop link (21).
 (c)  Connect the hinge arm. 1) Engage the hinge arm (15) with the hinge link (11). 2) Install the bolt (12), the washers (13), and the nut (14).
 S 434-017-B00
 (5)  
Connect the door to the airplane at the top hinge.

 (a)  
Connect the guide arm (10).

 1)  Install the attach fitting (6) to the hinge support (7) with the four bolts.

 (b)  
Connect the hinge arm (5). 1) Engage the hinge arm (5) with the hinge link (1). 2) Install the bolt (2), the washer (3), and the nut (4).

 (6)  
Remove the wood block from the door.

 (7)  
Install the hinge arm covers, the stop pins, and the door seal.

 S 094-018-B00
 S 434-019-B00
 NOTE: It is only necessary to install these parts on a new door.
____
 (a)  Install the hinge arm covers. 1) Put primer on the bolts that hold the hinge covers to the
 hinge arms. 2) Attach the hinge covers to the hinge arms with the bolts.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-41-00
 ALL  ú ú B02 Page 406 ú Mar 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (b) (c)  Install the stop pins on the edges of the door. 1) Put a layer of corrosion preventive compound on the threads of the stop pins. 2) Put the stop pins on the door.Install the door seal (AMM 52-09-13/401).
 (8)  S 824-020-B00Do this task:  "Galley Service Door Adjustment" (AMM 52-41-00/501).
 (9)  S 714-021-B00Do this task:  "Galley Service Door Test" (AMM 52-41-00/501).
 S 414-022-B00

 (10)
 Install the lining on the door (AMM 52-41-31/401). S 414-023-B00

 (11)
 Install the escape slide assembly on the door (AMM 25-61-35/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-41-00
 ALL  ú ú B01 Page 407 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 GALLEY SERVICE DOORS - ADJUSTMENT/TEST
______________________________________
 1.  General_______
 A. This procedure contains four tasks:
 (1)  
The operational test of the galley service door

 (2)  
The adjustment of the galley service door

 (3)  
A special adjustment to correct "soft unlatching"

 (4)  
The functional test of the galley service door.

 B.
These tasks are for the forward or the aft galley service door.

 TASK 52-41-00-705-001-B00
 2.  Galley Service Door Operational Test____________________________________
 A. General
 (1)  
This test is an operational check only and does not make sure the door is adjusted correctly.

 B.
Equipment

 (1)  
Maintenance Stand

 C.
References

 (1)  
24-22-00/201, Manual Control

 D.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 舱门 DOORS 1(123)