35-32-42Page 604
Feb 01/05
R R Bottle Pressure and Temperature Correction Graph Figure 602/TASK 35-32-42-991-004
EFF : ALL 35-32-42 Page 605 May 01/03
CES
Subtask 35-32-42-614-050
B. If necessary, remove the portable oxygen cylinders and fill them to the correct pressure (Ref. CMM 353155).
5. Close-up
________ Subtask 35-32-42-410-050
A. Close the doors that were opened for access.
EFF : ALL
35-32-42Page 606
Feb 01/05
R
CES
TASK 35-32-42-750-001
Test of the Low-Pressure Relief-Valves on the Portable Oxygen Cylinders
R R R R R R R WARNING : MAKE SURE THAT YOU OBEY THE MANUFACTURER'S INSTRUCTIONS AND NATIONAL_______ HAZARDOUS MATERIAL REGULATIONS WHEN YOU MOVE OR KEEP THIS EQUIPMENT IN STORAGE: - CHEMICAL OXYGEN CYLINDERS - PROTECTIVE BREATHING EQUIPMENT - FIXED AND PORTABLE OXYGEN CYLINDERS. SPECIAL PRECAUTIONS ARE NECESSARY FOR THIS EQUIPMENT.
1. Reason for the Job__________________
To make sure that the low-pressure relief-valves are serviceable.
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
CMM 353155
3. Job Set-up__________
Subtask 35-32-42-010-051
A. Get Access
(1) Get access to the portable oxygen cylinders in the passenger compartment.
(2) Remove the portable oxygen cylinders from their stowage positions.
4. Procedure_________
WARNING : CLEAN THE TOOLS AND MAKE SURE YOUR HANDS ARE CLEAN TO PREVENT_______ CONTAMINATION OF THE OXYGEN SYSTEM.
Subtask 35-32-42-750-050
A. Do the test of the low-pressure relief-valves on the portable oxygen cylinders (Ref. CMM 353155).
35-32-42Page 607
Feb 01/05
5. Close-up
________ Subtask 35-32-42-410-051
A. Close Access
(1)
Install the portable oxygen cylinders in their stowage positions.
(2)
Close the doors that were opened for access.
EFF : ALL
35-32-42Page 608
Feb 01/05
R
CES
TASK 35-32-42-750-002
Hydrostatic Test of the Portable Oxygen Cylinders
R R R R R R R WARNING : MAKE SURE THAT YOU OBEY THE MANUFACTURER'S INSTRUCTIONS AND NATIONAL_______ HAZARDOUS MATERIAL REGULATIONS WHEN YOU MOVE OR KEEP THIS EQUIPMENT IN STORAGE: - CHEMICAL OXYGEN CYLINDERS - PROTECTIVE BREATHING EQUIPMENT - FIXED AND PORTABLE OXYGEN CYLINDERS. SPECIAL PRECAUTIONS ARE NECESSARY FOR THIS EQUIPMENT.
1. Reason for the Job__________________
To do a hydrostatic test of the portable oxygen cylinders.
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
CMM 353155
3. Job Set-up__________
Subtask 35-32-42-010-052
A. Get Access
(1) Get access to the portable oxygen cylinders in the passenger compartment.
(2) Remove the portable oxygen cylinders from their quick release supports.
4. Procedure_________
WARNING : CLEAN THE TOOLS AND MAKE SURE YOUR HANDS ARE CLEAN TO PREVENT_______ CONTAMINATION OF THE OXYGEN SYSTEM.
Subtask 35-32-42-750-051
A. Do the hydrostatic test of the portable oxygen cylinders (Ref. CMM 353155).
35-32-42Page 609
Feb 01/05
5. Close-up
________ Subtask 35-32-42-410-052
A. Close Access
(1)
Install the portable oxygen cylinders in to their quick release supports.
(2)
Close the doors that were opened for access.
EFF : ALL
35-32-42Page 610
MASK - FULL FACE - INSPECTION/CHECK
___________________________________ TASK 35-32-51-210-001 Inspection/Check of the Full-Face Smoke Masks 6540HM, 6549HM and 6550HM
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM OXYGEN 氧气(174)
