A. Install the inflation reservoir of the offwing escape slide (Ref. TASK 25-62-46-400-001).
R EFF : 001-049, 051-099, 101-149, 151-199, 25-62-00Page 612 201-299, 401-499, Aug 01/05
CES CES SLIDE - ESCAPE, OFFWING (7504MM,7505MM) - REMOVAL/INSTALLATION
R **ON A/C 301-399,
R TASK 25-62-00-750-003
R Hydrostatic Test of Door 2/3 Escape-Slide Inflation Reservoir
R 1. Reason for the Job__________________
R Refer to the MPD TASK: 256249-01
R 2. Job Set-up Information______________________
R A. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 25-62-49-000-001 Inflation Reservoir, Escape-Slide - Removal
R 25-62-49-400-001 Inflation Reservoir, Escape-Slide - Installation
R CMM 256521
R 3. Job Set-up__________
R Subtask 25-62-00-020-055
R A. Remove the inflation reservoir for the door 2/3 escape slide (Ref. TASK
R 25-62-49-000-001).
R 4. Procedure_________
R Subtask 25-62-00-750-052
R A. Do the hydrostatic test of the inflation reservoir for the door 2/3
R escape slide (Ref. CMM 256521).
R 5. Close-up________
R Subtask 25-62-00-420-055
R A. Install the inflation reservoir for the door 2/3 escape slide (Ref. TASK
R 25-62-49-400-001).
______________________________________________________________
TASK 25-62-42-000-002
Offwing Escape-Slide - Removal after Inflation
1. Reason for the Job
__________________
Self Explanatory.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific blanking plugs No specific warning notce No specific access platform 2.5 m (8 ft. 2 in.) 98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-62-42-400-001 Offwing Escape-Slide - Installation 25-62-46-000-001 Inflation Reservoir, Offwing Escape-Slide - Removal 25-62-46-400-001 Inflation Reservoir, Offwing Escape-Slide -
Installation 27-50-00-866-009 Retraction of the Flaps on the Ground 25-62-42-991-004 Fig. 401 25-62-42-991-005 Fig. 402
R EFF : 001-049, 051-099, 101-149, 151-199, 25-62-42Page 401 201-299, 401-499, Aug 01/05
CES 3. Job Set-up
__________
Subtask 25-62-42-481-051
A. Safety Precautions before Removal
(1) In the cockpit: WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______ BEFORE YOU START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
(a)
set the the flap/slat control lever to the 0 position (Ref. TASK 27-50-00-866-009),
(b)
install the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) on the flap/slat control lever when you work near the flaps,
(c)
put a warning notce in position on the flap/slat control lever to tell persons not to operate the flaps.
Subtask 25-62-42-941-054
B. Access to the Inflated Offwing Escape Slide
(1) Put the access platform in position: R (a) FOR 7504MM
-at the escape slide enclosure 193AT, R (b) FOR 7505MM
-at the escape slide enclosure 194AT,
4. Procedure
_________
Subtask 25-62-42-020-051
A. Removal of the Offwing Escape Slide Assembly, 7504MM (7507MM)
(Ref. Fig. 401/TASK 25-62-42-991-004)
CAUTION : KEEP OFF THE INFLATED ESCAPE-SLIDE. IF YOU GO ON IT, YOU CAN
_______
CAUSE DAMAGE TO THE SURFACE MATERIAL.
R EFF : 001-049, 051-099, 101-149, 151-199, 25-62-42Page 402 201-299, 401-499, Aug 01/05
CES
(1)
Deflate the offwing escape slide (15):
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(80)
