**ON A/C ALL
5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 25-62-00-410-050
A. Close Access
(Ref. Fig. 601/TASK 25-62-00-991-001)
(1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) FOR 7506MM
(a) Install the access panel 151KW. R (3) FOR 7507MM
(a) Install the access panel 152KW.
(4)
Set the AFT CARGO COMPT light switch 8LU to the OFF position.
(5)
Remove the access platform(s).
(6) Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002). **ON A/C 301-399,
Subtask 25-62-00-410-050-A
A. Close Access
(Ref. Fig. 601A/TASK 25-62-00-991-001-A)
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Do one of the two applicable steps:
-Close the door of the overhead stowage compartment.
-Or, close the access door (7) and push the quick-release fasteners
(6) to lock the door (7).
EFF : ALL
25-62-00Page 609
R R (3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R **ON A/C ALL
Subtask 25-62-00-862-056
B. De-energize the ground service network (Ref. TASK 24-42-00-862-001).
EFF : ALL
25-62-00Page 610
TASK 25-62-00-750-001
Hydrostatic Test of the Escape-Slide/Slide Raft Inflation-Reservoir
1.
Reason for the Job
__________________
Refer to the MPD TASK: 256241-02
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly R 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly CMM 256517
3. Job Set-up
__________
Subtask 25-62-00-020-052
A. Remove the escape slide/escape slide (raft) pack-assembly (Ref. TASK 25-62-44-000-002).
4. Procedure
_________
Subtask 25-62-00-750-050
A. Do the hydrostatic test of the inflation reservoir (Ref. CMM 256517).
5. Close-up
________
Subtask 25-62-00-420-052
A. Install the escape slide/escape slide (raft) pack-assembly (Ref. TASK 25-62-44-400-001).
EFF : ALL
25-62-00Page 611
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
TASK 25-62-00-750-002
Hydrostatic Test of the Offwing Escape-Slide Inflation Reservoir
1.
Reason for the Job
__________________
Refer to the MPD TASK: 256242-01
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-62-46-000-001 Inflation Reservoir, Offwing Escape-Slide - Removal 25-62-46-400-001 Inflation Reservoir, Offwing Escape-Slide -Installation CMM 256517
3. Job Set-up
__________
Subtask 25-62-00-020-053
A. Remove the inflation reservoir of the offwing escape slide (Ref. TASK 25-62-46-000-001).
4. Procedure
_________
Subtask 25-62-00-750-051
A. Do the hydrostatic test of the inflation reservoir of the offwing escape slide (Ref. CMM 256517).
5. Close-up
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(79)