(Ref. Fig. 403/TASK 25-55-11-991-003) R **ON A/C 151-199, 401-499,
(Ref. Fig. 403A/TASK 25-55-11-991-003-A)
**ON A/C 301-399,
(Ref. Fig. 403B/TASK 25-55-11-991-003-B)
**ON A/C ALL
Subtask 25-55-11-910-052
A. Preparation for Installation
(1)
Clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
(3)
If necessary, remove the damaged tape (48) from the partition panels (41).
EFF : ALL
25-55-11Page 434
(4) Clean the component interface and/or the adjacent area with CLEANING AGENTS (Material No. 11-004).
(5) Renew the removed tape (48) on the partition panels (41).
Subtask 25-55-11-420-052
B. Installation of the Sidewall Panels
NOTE : The installation of each sidewall panel is the same.
____
(1)
Put the sidewall panels (41) in the correct installation position on the aircraft structure.
(2)
Secure the sidewall panels (41) with the studs (47).
5. Close-up
________
Subtask 25-55-11-410-052
A. Put the aircraft back to the serviceable condition.
(1) Make sure that the work area is clean and clear of tool(s) and other items.
R **ON A/C 001-049, 101-105,
Subtask 25-55-11-865-058
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
For the AFT cargo compartment:
102MY and 103MY.
Subtask 25-55-11-942-059
C. Close Access
(1)
Remove the actuator safety lock and close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(2)
Remove the warning notice(s).
(3)
Remove the access platform(s).
EFF : ALL
25-55-11Page 435
R **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399, 401-499,
Subtask 25-55-11-942-059-A
C. Close Access
(1)
Remove the actuator safety lock and close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(2)
Remove the access platform(s).
R EFF : 051-099, 106-149, 151-199, 201-299, 25-55-11Page 436 301-399, 401-499, Aug 01/05
CES LININGS AND PARTITIONS - AFT CARGO COMPARTMENT FR47 - REPAIRS
_____________________________________________________________
TASK 25-55-11-300-001
Fasteners Missing from the Lining Panels of the AFT Cargo Compartment
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
No specific Highspeed Tape
No specific access platform 2.0 m (6 ft. 7 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 08-060 USA MIL-T-4053 TAPE, PRESSURE SENSITIVE,GLASSCLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-50-00-200-002 General Visual Inspection of Cargo Compartment Decompression, Lining and Floor Panels 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump R 25-55-11-991-005 Fig. 801 R 25-55-11-991-006 Fig. 802
EFF : ALL
25-55-11Page 801
3. Job Set-up
__________
**ON A/C 001-049, 101-105,
Subtask 25-55-11-010-055-A
A. Get Access
(1)
Open the AFT cargo-compartment door and install the actuator safety lock (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position at the opening of the AFT cargo-compartment door.
(3)
Put a warning notice in position on the control panel of the AFT cargo loading system (CLS) to tell persons not to use it.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(29)
