(2)
Do an inspection of the component interface and/or the adjacent area.
(3)
If necessary, remove damaged tape (6),(9) from the partition panels (1),(2),(3) and from the valve (4).
EFF : ALL
25-54-12Page 412
(4)
Clean the component interface and/or the adjacent area with CLEANING AGENTS (Material No. 11-004).
(5)
Renew the removed tape (6),(9) on the partition panels (1),(2),(3) and on the valve (4).
Subtask 25-54-12-420-050
B. Installation of the FWD Cargo-Compartment Partition FR34
(1)
Put the valve (4) and the cover assy (7) in the correct position on the partition panel (3) and fasten them with the studs (8).
(2)
Install the partition panels (1),(2),(3).
(3)
Fasten the partition panels (1),(2),(3) with the studs (5).
5. Close-up
________
Subtask 25-54-12-410-050
A. Put the aircraft back to the serviceable condition.
(1) Make sure that the work area is clean and clear of tool(s) and other items.
R **ON A/C 001-049, 101-105,
Subtask 25-54-12-865-058
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 2MY and 3MY.
Subtask 25-54-12-942-054
C. Close Access
(1)
Remove the actuator safety lock and close the FWD cargo-compartment door (Ref. TASK 52-30-00-860-002).
(2)
Remove the warning notice(s).
(3)
Remove the access platform(s).
EFF : ALL
25-54-12Page 413
R **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399, 401-499,
Subtask 25-54-12-942-054-A
C. Close Access
(1)
Remove the actuator safety lock and close the FWD cargo-compartment door (Ref. TASK 52-30-00-860-002).
(2)
Remove the access platform(s).
R EFF : 051-099, 106-149, 151-199, 201-299, 25-54-12Page 414 301-399, 401-499, Aug 01/05
CES **ON A/C ALL
TASK 25-54-12-000-002
Removal of the Ceiling Panels in the FWD Cargo Compartment
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
No specific access platform 2.1 m (6 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
**ON A/C 001-049, 051-099, 101-149, 201-299,
25-54-12-991-004 Fig. 402 R **ON A/C 151-199, 401-499,
25-54-12-991-004-A Fig. 402A
**ON A/C 301-399,
25-54-12-991-004-B Fig. 402B
EFF : ALL
25-54-12Page 415
**ON A/C ALL
3. Job Set-up
__________
**ON A/C 001-049, 101-105,
Subtask 25-54-12-010-051
A. Get Access
(1)
Open the FWD cargo-compartment door and install the actuator safety lock (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position at the opening of the FWD cargo-compartment door.
(3)
Put a warning notice on the control panel of the FWD cargo loading system to tell persons not to use it.
R **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399, 401-499,
Subtask 25-54-12-010-051-A
A. Get Access
(1)
Open the FWD cargo-compartment door and install the actuator safety lock (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position at the opening of the FWD cargo-compartment door.
**ON A/C 001-049, 101-105,
Subtask 25-54-12-865-050-A
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2000VU SEMI AUTO CLS-FWD 2MY E06 2000VU SEMI AUTO CLS-FWD 3MY E08
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(3)
