(a)
Make sure that each decompression panel is in the correct position.
(b)
Make sure that each decompression panel is in the correct condition.
(c)
Make sure that the seal of each decompression panel is in the correct condition.
(7)
If necessary, replace the applicable decompression panel(s) and/or seal(s) (Ref. TASK 25-68-41-960-001).
Subtask 25-55-11-420-051
B. Installation of the Ceiling Panels
NOTE : The installation of each ceiling panel is the same.
____
(1)
Put the ceiling panels in the correct installation postion.
(2)
Secure the ceiling panels with studs (3),(4) and (7).
(3)
Install the joint strips (5) on the ceiling panels (2).
5. Close-up
________ Subtask 25-55-11-410-051
A. Put the aircraft back to the serviceable condition.
(1) Make sure that the work area is clean and clear of tool(s) and other items.
EFF : ALL
25-55-11Page 424
May 01/04
R
CES **ON A/C 001-049, 101-105,
Subtask 25-55-11-865-056
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
For the AFT cargo compartment
102MY and 103MY
Subtask 25-55-11-942-058
C. Close Access
(1)
Remove the actuator safety lock and close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(2)
Remove the warning notice(s).
(3) Remove the access platform(s). R **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399, 401-499,
Subtask 25-55-11-942-058-A
C. Close Access
(1)
Remove the actuator safety lock and close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(2)
Remove the access platform(s).
EFF : ALL
25-55-11Page 425
**ON A/C ALL
TASK 25-55-11-000-003
Removal of the Sidewall Panels in the AFT Cargo Compartment - FR47/FR59
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
No specific access platform 2.1 m (6 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
**ON A/C 001-049, 051-099, 101-149, 201-299,
25-55-11-991-003 Fig. 403 R **ON A/C 151-199, 401-499,
25-55-11-991-003-A Fig. 403A
**ON A/C 301-399,
25-55-11-991-003-B Fig. 403B
EFF : ALL
25-55-11Page 426
**ON A/C ALL
3. Job Set-up
__________ R **ON A/C 001-049, 101-105,
Subtask 25-55-11-010-052
A. Get Access
(1)
Open the AFT cargo-compartment door and install door actuator safety lock (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position at the opening of the AFT cargo-compartment door. (3)
(3)
Put the warning notice on the control panel of the AFT cargo laoding system to tell persons not to use it.
R **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399, 401-499,
Subtask 25-55-11-010-052-A
A. Get Access
(1)
Open the AFT cargo-compartment door and install door actuator safety lock (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position at the opening of the AFT cargo-compartment door. (3)
**ON A/C 001-049, 101-105,
Subtask 25-55-11-865-052-A
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2001VU SEMI AUTO CLS-AFT 102MY D06 2001VU SEMI AUTO CLS-AFT 103MY D08
EFF : ALL
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(27)
