(c)
If necessary, remove the plug housing (9) from the structure (3).
(4) Remove the tie-down fittings (12): NOTE : The removal procedure for all the tie-down fittings (12) is
____ the same. Therefore, the removal procedure for one tie-down fitting (12) only is given here.
(a)
Remove the nuts (13), and remove the screws (11) from the tie-down fitting (12).
(b)
Remove the tie-down fitting (12) from the structure (3).
EFF : 001-049, 051-099, 101-149, 203-299, 25-55-41Page 423
Aug 01/05
R
CES
Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area Figure 403/TASK 25-55-41-991-003- 12 (SHEET 1)
R EFF : 001-049, 051-099, 101-149, 221-221, 25-55-41Page 424 224-224, 228-228, May 01/05
CES
Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area Figure 403/TASK 25-55-41-991-003- 22 (SHEET 2)
R EFF : 001-049, 051-099, 101-149, 221-221, 25-55-41Page 425 224-224, 228-228, May 01/05
CES
Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area Figure 403A/TASK 25-55-41-991-003-B
R EFF : 151-199, 25-55-41Page 426 May 01/04
CES
Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area Figure 403B/TASK 25-55-41-991-003-A
R EFF : 201-220, 222-223, 225-227, 229-299, 25-55-41Page 427 301-399, Feb 01/05
CES
(5) Remove the seat-track sections (15): NOTE : The removal procedure for all the seat-track sections (15) is
____ the same. Therefore, the removal procedure for one seat-track section (15) only is given here.
(a)
Remove the nuts (16), and remove the screws (14) from the seat-track section (15).
(b)
Remove the seat-track section (15) from the structure (3).
(6)
Remove the tie-down fitting (18):
(a)
Remove the nuts (19), and remove the screws (17) from the tie-down fitting (18).
(b)
Remove the tie-down fitting (18) from the structure (3).
(7)
Remove the tie-down fittings (21): NOTE : The removal procedure for all the tie-down fittings (21) is
____ the same. Therefore, the removal procedure for one tie-down fitting (21) only is given here.
(a)
Remove the nuts (22), and remove the screws (20) from the tie-down fitting (21).
(b)
Remove the tie-down fitting (21) from the structure (3).
(8)
Remove the tie-down fitting (24):
(a)
Remove the nuts (25), and remove the screws (23) from the tie-down fitting (24).
(b)
Remove the tie-down fitting (24) from the structure (3).
(9)
Remove the tie-down fitting (27):
(a)
Remove the nuts (28), and remove the screws (26) from the tie-down fitting (27).
(b)
Remove the tie-down fitting (27) from the structure (3).
(3)
Remove the tie-down points (8): NOTE : The removal procedure for all the tie-down points (8) is the
R **ON A/C 151-199, 201-202, 301-399, 401-499,
Subtask 25-55-41-020-052-A
C. Removal of the Tie-Down and Net Attachment Fittings from the Floor Area of the BULK Cargo-Compartment
**ON A/C 151-199,
(Ref. Fig. 403A/TASK 25-55-41-991-003-B)
**ON A/C 201-202, 301-399,
(Ref. Fig. 403B/TASK 25-55-41-991-003-A)
R **ON A/C 401-499,
R (Ref. Fig. 403C/TASK 25-55-41-991-003-C)
R **ON A/C 151-199, 201-202, 301-399, 401-499,
(1) Remove the cargo net(s) (5), if installed:
(a) Disconnect the net fittings (6) from the applicable net attachment fittings of the cargo-compartment floor and ceiling areas.
(b) Remove the cargo net(s) (5).
(2) Remove the tie-down points (2):
NOTE : The removal procedure for all the tie-down points (2) is the____ same. Therefore, the removal procedure for one tie-down point (2) only is given here.
(a) Remove the nuts (4), and remove the screws (1) from the tie-down point (2).
(b) Remove the tie-down point (2) from the structure (3).
R Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area
R Figure 403C/TASK 25-55-41-991-003-C
R EFF : 401-499, 25-55-41 Page 430
Aug 01/05
CES
____ same. Therefore, the removal procedure for one tie-down point
(8) only is given here.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(46)
