(b)
Apply the SEALANTS (Material No. 09-016) (3) and fill the gap between the plug housing (2) and the cutout in the floor panel (1).
EFF : ALL
25-54-41Page 425
Application of Sealants
Figure 403/TASK 25-54-41-991-003
EFF : ALL 25-54-41 Page 426
May 01/04
CES
(2)
For the tie-down and net attachment fittings installed in an open cutout:
(a)
Make sure that the gaps between the tie-down fitting (4) and the cutouts in the floor panels (1) are clean.
(b)
Apply the SEALANTS (Material No. 09-016) (3) and fill the gaps between the tie-down fitting (4) and the cutouts in the floor panels (1).
(3)
Use a lint-free cloth MISCELLANEOUS (Material No. 19-003) and the CLEANING AGENTS (Material No. 11-003) to remove the unwanted sealant from the component interface and the adjacent area.
5. Close-up
________ Subtask 25-54-41-410-050
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the actuator safety lock and close the FWD cargo-compartment door (Ref. TASK 52-30-00-860-002).
(3)
Remove the access platform(s).
EFF : ALL
25-54-41Page 427
LININGS AND FURNISHINGS/AFT CARGO COMPARTMENT - DESCRIPTION AND OPERATION
_________________________________________________________________________
1. General
_______
R **ON A/C 001-049, 051-061, 101-105,
The AFT cargo hold is in Zone 150/160 between the fixed partitions FR47 and FR65. A divider net divides the AFT cargo hold into seperate compartments. They are specified as cargo compartments 3, 4 and 5. Cargo compartment 5 is specified as the BULK cargo compartment. The AFT cargo compartment door which is found between FR52A and FR56 gives access to the cargo compartments 3 and 4. The BULK cargo compartment door which is found between FR60 and FR62 gives access to the cargo compartment 5.
Included in the AFT and the BULK cargo compartments are the subsequent linings:
-
the left sidewall lining,
-
the ceiling panel,
-
the right sidewall lining.
Included in the AFT and the BULK cargo compartments are the subsequent furnishings:
-
the loading area light,
-
the smoke detector panel,
-
the rapid decompression panels,
-
the cargo compartment lighting,
-
the door net,
-
the BULK door net,
-
the divider nets,
-
the tie-down/net attachment points,
-
the access panels,
-
the air conditioning inlets,
-the air conditioning outlets. R
R **ON A/C 062-099, 106-149, 221-221, 224-224, 228-228,
The AFT cargo hold is in Zone 150/160 between the fixed partitions FR47 and FR65. A divider net divides the AFT cargo hold into seperate compartments. They are specified as cargo compartments 3, 4 and 5. Cargo compartment 5 is specified as the BULK cargo compartment. The AFT cargo compartment door which is found between FR52A and FR56 gives access to the cargo compartments CES CES
3 and 4. The BULK cargo compartment door which is found between FR60 and FR62 gives access to the cargo compartment 5.
Included in the AFT and the BULK cargo compartments are the subsequent linings:
- the left sidewall lining, - the ceiling panel, - the right sidewall lining.
Included in the AFT and the BULK cargo compartments are the subsequent furnishings:
- the loading area light, - the access panels, - the smoke detector panels, - the rapid decompression panels, - the cargo compartment lighting, - the AFT door net, - the BULK door net, - the divider net, - the tie-down/net attachment points, - the air conditioning inlets, - the air conditioning outlets,
R **ON A/C 201-220, 222-223, 225-227, 229-299,
R
R R R R R R R The AFT cargo hold is in Zone 150/160 between the fixed partitions FR47 and FR65. A divider net divides the AFT cargo hold into seperate compartments. They are specified as cargo compartments 3, 4 and 5. Cargo compartment 5 is specified as the BULK cargo compartment. The AFT cargo compartment door which is found between FR52A and FR56 gives access to the cargo compartments 3, 4 and 5.
R R R Included in the AFT and the BULK cargo compartments are the subsequent linings:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(17)
