(4)
Make sure that the work area is clean and clear of tool(s) and other items.
Subtask 25-65-51-862-050
B. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL
25-65-51Page 209
FLASHLIGHT - COCKPIT - REMOVAL/INSTALLATION
___________________________________________
TASK 25-65-52-000-001 Removal of the Cockpit Flashlight
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-65-52-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-65-52-860-050
A. Not applicable.
4. Procedure
_________ (Ref. Fig. 401/TASK 25-65-52-991-001) Subtask 25-65-52-020-050
A. Removal of the Cockpit Flashlight
(1)
Remove the screws (11).
(2)
Remove the reinforcing strips (10) and the shield (9) from the bracket (5).
(3)
Remove the flashlight (8).
(4)
Remove the nuts (4), the washers (6), the screws (7) and (12).
(5)
Remove the bracket (5) from the support (3).
(6)
Remove the screws (2), the washers (1) and the support (3).
Cockpit Flashlight
Figure 401/TASK 25-65-52-991-001
CES TASK 25-65-52-400-001 Installation of the Cockpit Flashlight
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-65-52-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-65-52-860-051
A. Not applicable.
4. Procedure
_________ (Ref. Fig. 401/TASK 25-65-52-991-001) Subtask 25-65-52-420-050
A. Installation of the Cockpit Flashlight
(1)
Install the support (3) on the panel with the washers (1) and the screws (2).
(2)
Put the bracket (5) in position on its support (3).
(3)
Install the screws (7) and (12), the washers (6) and the nuts (4).
(4)
Install the flashlight (8) on the bracket (5).
(5)
Install the shield (9) with the reinforcing strips (10).
(6)
Install the screws (11).
5. Close-up
________ Subtask 25-65-52-860-052
A. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tool(s) and other items.
FLOATATION AND SURVIVAL EQUIPMENT - DESCRIPTION AND OPERATION
_____________________________________________________________
1. General
_______
The floatation and survival equipment is installed in the aircraft at different locations. It is easy to get access to the equipment, which is kept prepared for immediate use, if an on-board emergency occurs.
2. Component Location
__________________
**ON A/C 003-049, 101-149, 151-199, 201-299,
(Ref. Fig. 001)
**ON A/C 301-301, 303-399,
(Ref. Fig. 001A)
**ON A/C ALL
(Ref. Fig. 002)
**ON A/C 051-099,
(Ref. Fig. 003)
**ON A/C 301-301, 303-399,
(Ref. Fig. 003A) R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 004)
EFF : ALL
25-66-00Page 1
Floatation and Survival Equipment - Component Location Figure 001
R EFF : 003-049, 101-149, 151-199, 201-299, 25-66-00 Page 2 May 01/05
CES
Floatation and Survival Equipment - Component Location Figure 001A
R EFF : 301-301, 303-399, 25-66-00 Page 3 May 01/05
CES
Life Vests - Component Location Figure 002
R EFF : ALL 25-66-00 Page 4 Nov 01/04
CES
R R Supplemental Life Raft/s - Component Location Figure 003
R EFF : 051-099, 25-66-00 Page 5 May 01/05
CES
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(166)
