-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
20-11-11-911-001 WIRELOCKING
24-42-00-861-001 Energize the Ground Service Network from the External
Power
24-42-00-862-001 De-energize the Ground Service Network Supplied from
the External Power
25-23-47-000-004 Removal of the Door Frame Linings of the LH FWD
Emergency Exit Door, zone 231
25-23-47-000-009 Removal of the Door Frame Linings of the RH FWD
Emergency Exit Door, zone 232
25-23-47-000-010 Removal of the Door Frame Linings of the LH/RH AFT
Emergency Exit Doors, zones 251/252.
25-23-47-400-004 Installation of the Door Frame Linings of the LH FWD
Emergency Exit Door, zone 231
25-23-47-400-009 Installation of the Door Frame Linings of the RH FWD
Emergency Exit Door, zone 232
25-23-47-400-010 Installation of the Door Frame Linings of the LH/RH
AFT Emergency Exit Doors, zones 251/252.
25-62-49-000-001 Inflation Reservoir, Escape-Slide - Removal
25-62-49-400-001 Inflation Reservoir, Escape-Slide - Installation
25-80-00-000-001 Removal of the Insulation Blankets
25-80-00-400-001 Installation of the Insulation Blankets
52-22-00-010-001 Opening of the Emergency Exit Doors from the
Passenger Compartment
52-22-00-010-002 Opening of the Emergency Exit Doors from the Outside
52-22-00-410-001 Closing of the Emergency Exit Doors from the
Passenger Compartment
52-22-00-410-002 Closing of the Emergency Exit Doors from the Outside
52-22-00-820-004 Adjustment of the Slide Release Mechanism
52-22-00-860-003 Special Precaution before Maintenance on the Door
Damper and Emergency Operation Cylinder
52-22-00-860-004 Special Precaution after Maintenance on the Door
Damper and Emergency Operation Cylinder
25-62-48-991-001 Fig. 401
EFF : 301-399, 25-62-48Page 419
Nov 01/04
R
CES -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-62-48-991-002 Fig. 402 25-62-48-991-003 Fig. 403
3. Job Set-up
__________
Subtask 25-62-48-860-050
A. Aircraft Maintenance Configuration (Ref. Fig. 401/TASK 25-62-48-991-001, 402/TASK 25-62-48-991-002, 403/TASK 25-62-48-991-003)
(1)
Make sure that the ground service network is energized (Ref. TASK 24-42-00-861-001).
(2)
Make sure that the access platform(s) are in position at the applicable Emergency Exit Door(s).
(3)
Make sure that the Emergency Exit Door(s) are open (Ref. TASK 52-22-00-010-001), or (Ref. TASK 52-22-00-010-002).
(4)
Make sure that the warning notice(s) are in position on the Emergency Exit Door(s), to tell persons not to close the door(s).
(5)
Make sure that the special precaution on the door damper and the emergency operation cylinder is made (Ref. TASK 52-22-00-860-003).
(6)
Make sure you have access to the inflation reservoir(s):
WARNING : BE CAREFUL WITH THE INFLATION RESERVOIR AND ITS COMPONENTS.
_______ THE RESERVOIR IS AN ALUMINUM BOTTLE WOUND IN KEVLAR FIBERS BONDED WITH EPOXY RESINS, AND IS PRESSURIZED WITH GAS. IF YOU CAUSE DAMAGE TO THE RESERVOIR, THERE IS A RISK OF EXPLOSION. NO DAMAGE IS PERMITTED.
(a)
Make sure that the overhead-stowage compartment-door(s) (3) above the Emergency Exit Door(s) is(are) open.
(b)
Make sure that the inflation-reservoir access-panel (1) above the Emergency Exit Door is removed from the door frame lining.
NOTE : This step is only necessary when the LH FWD Emergency Exit
____ Door is also a Passenger/Crew Door.
EFF : 301-399, 25-62-48Page 420
Nov 01/04
R
CES
(7) Make sure that the lockpin assembly is installed in the operating
head of the inflation reservoir (Ref. TASK 25-62-49-000-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备4(138)
