EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-31-00
ALL ú ú 01 Page 512 ú Jul 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
0.350 0.400 0.450 0.500 0.550 0.6000.650 VOLTAGE
Barometric Correction Potentiometer Voltage Chart Figure 502
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-31-00
ALL ú ú 01 Page 513 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 725-017
(4) Do this test of the potentiometer wiper (test pin D or test jack 4) for the barometric correction in the automatic mode:
(a)
Set the mode selector switch to AUTO.
(b)
Turn the barometric set knob for the captain's standby altimeter through its range and make sure the voltage changes smoothly and continuously.
(c)
Set the captain's standby altimeter to 29.92 inch Hg (1013 mbs).
(d)
Measure the voltage at test pin D or test jack 4.
1) Make a record of the voltage.
(e)
Get the field pressure for the day.
1) Make a record of the field pressure.
(f)
Refer to Figure 502 and read the barometric correction potentiometer voltage for the field pressure.
(g)
Make sure that the voltage at test pin D or test jack 4 is |0.010 volt of the voltage that you read from Figure 502.
S 725-018
(5) Do this test of the potentiometer wiper (test pin E or test jack 5) for the cabin altitude:
(a)
Set the mode selector switch to STBY.
(b)
Turn the CAB ALT control from -990 feet through 000 feet and make sure the voltage changes smoothly and continuously.
(c)
Set the CAB ALT control to these adjustments and make sure the measured voltages agree with the voltages shown. ~....................................................... | ALTITUDE (feet) | VOLTS dc (|0.05) | | .............................. | | Test Jack 5 | Test Pin E | ......................................................... | +400 | -7.68 | -5.76 | ......................................................... | +1,400 | -7.00 | -5.25 | ......................................................... | +2,400 | -6.34 | -4.76 | ......................................................... | +3,400 | -5.70 | -4.28 | ......................................................... | +4,400 | -5.08 | -3.81 | ......................................................... | +5,400 | -4.48 | -3.36 | ......................................................... | +6,400 | -3.89 | -2.92 | ......................................................... | +7,400 | -3.33 | -2.50 | 2..........................…..............….............1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-31-00
ALL ú ú 02 Page 514 ú Jul 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 725-019
(6) Do this test of the potentiometer wiper (test pin F or test jack 6) for the barometric correction in the standby mode:
(a)
Set the mode selector to STBY.
(b)
Set the FLT-GRD switch to FLT.
(c)
Turn the barometric set knob for the captain's standby altimeter through its range and make sure the voltage changes smoothly and continuously.
(d)
Set the captain's standby altimeter to 29.92 inch Hg (1013 mbs).
(e)
Measure the voltage at test pin F or test jack 6.
1) Make a record of the voltage.
(f)
Get the field pressure for the day.
1) Make a record of the field pressure.
(g)
Refer to Figure 502 and read the barometric correction potentiometer voltage for the field pressure.
(h) 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：737-300 400 500 AMM 飞机维护手册 空调 AIR CONDITIONING 1(91)
