21-22-11
ALL ú ú 01 Page 802 ú Feb 20/84
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
B. Access
(1) Location Zones
100 Upper Half of Fuselage
200 Lower Half of Fuselage
C. Procedure
S 018-001
(1)
Remove the items which are necessary to get access to the air duct.
S 038-002
(2)
Loosen the duct clamps or remove them if it is necessary to do the repair.
S 038-003
(3)
Remove the insulation from the damaged area on the air duct if it is necessary.
S 348-026
(4)
Do these steps to repair the damaged duct:
(a) Remove the sharp edges of the damaged area on the duct with a file.
NOTE: The damaged area must be smooth and round.
____
(b)
Rub the damaged area with the sandpaper until the area is not glossy.
(c)
Clean the damaged area with a cloth that is moist with the solvent.
(d)
Dry the damaged area with a clean cloth before the solvent can dry.
(e)
Prepare a patch that will make a 1.0 inch overlap on all sides of the damaged area.
(f)
Mix the adhesive fully.
(g)
Apply a layer of the adhesive to the damaged area and to the patch.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-22-11
ALL ú ú 02 Page 803 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(h)
Put the patch on the damaged area while you apply pressure to it.
(i)
Hold the patch temporarily to the duct with the tape or string until the adhesive dries fully.
S 438-013
(5) Install the insulation which you removed from duct.
NOTE: You can use the adhesive to attach the insulation to the
____
duct.
S 438-014
(6)
Install the duct clamps.
S 418-015
(7)
Install the items which you removed to get access to the duct.
TASK 21-22-11-308-016
3. Conditioned Air Duct - Temporary Repairs (Fig. 801)
________________________________________
A. Consumable Materials
(1) Solvent (Ref 20-30-31/201)
NOTE: You can use one of these solvents.
____
(a)
B00036 - Freon 113
(b)
B00037 - Freon TF
(2) G02128 - Tape - Fiberglass, 1 and 3 inches wide (AMM 20-30-51/201)
B. Access
(1) Location Zones
100 Upper Half of Fuselage
200 Lower Half of Fuselage
C. Procedure
S 018-018
(1) Remove the items which are necessary to get access to the air duct.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-22-11
ALL ú ú 01 Page 804 ú Nov 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(2) S 038-019Loosen the duct clamps or remove them if it is necessary to do the repair.
(3) S 038-020Remove the insulation from the damaged area on the duct if it is necessary.
(4) S 348-021Do these steps to repair a duct which is broken: (a) Remove the sharp edges on the duct with a file.
NOTE:____ If the duct has too much damage, you must remove the damaged section and install a new section.
(b) (c) (d) (e) Clean the damaged area with a cloth that is moist with the solvent.Dry the damaged area with a clean cloth before the solvent dries.Align the mating ducts until there is a 1/8 to 3/8-inch clearance between the ducts.Apply one or two layers of the 3-inch wide tape around the duct joint.
NOTE:____ The centerline of the tape must align with the duct joint.
(f) Apply one layer of the 1-inch wide tape around each edge of the 3-inch wide tape (Fig. 801).
NOTE:____ The centerline of the 1-inch wide tape must align with the edge of the 3-inch wide tape.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 空调 AIR CONDITIONING 1(40)
