-
The new Limit value shows under theNEW LIMIT indication.
-
The new Validity value shows on thebottom of the display (scratchpad).
-
The Reason shows on the bottom of thedisplay (scratchpad).
R 1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page 239 1 1 May 01/05 1 1 1CES 1 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------NOTE : The REASON indication you can enter optional to inform the operator
____ about the reason of the limit change.
-Push the line key adjacent to * - The message VALIDATE OK shows. VALIDATE indication to save the new limit values.
On the center pedestal:
-The printer makes a printout of the revised limit values.
NOTE : If you push the line key adjacent to RETURN TO DEFAULT * the default
____
value is used (GSE). On the MCDU:
-Push the line key adjacent to < RETURN indication.
Subtask 31-36-00-740-065
D. Programmable Report CountersOn the MCDU display:
-The AIDS DMU PROGRAMMING page comesinto view.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:
-
Push the line key adjacent to < REPORT COUNTERS indication.
-
Push the line key adjacent to the related Report Number indication (e.g <REPORT (e.g. < REPORT 01).
-Set the selected report counter value to its corresponding limit.
-Push the line key adjacent to < RETURN indication.
On the MCDU display:
-
The AIDS REPORT COUNTERS page comesinto view.
-
The related REPORT X COUNTERS pagecomes into view.
-
The AIDS DMU PROGRAMMING MENU pagecomes into view.
R 1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page 240 1 1 May 01/05 1 1 1CES 1 **ON A/C 151-199, 201-210,
Subtask 31-36-00-740-058-A
A. AIDS DMU Programming Procedure.
(1) Get access to the PROGRAMMING MENU.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:
-
Push the MCDU MENU mode key.
-
Push the line select adjacent to the < AIDS indication.
-
Push the line select adjacent to the < PROGRAMMING indication.
-Enter the Password with the alphanumeric keys.
NOTE : The password is defined via
____ the GSE.
-
Push the line select key adjacent to the < ENTER CODE indication.
-
Push the line select key adjacent to the < PROGRAMMING MENUS indication.
On the MCDU display:
-
The MCDU MENU page shows.
-
The AIDS page shows.
-
The PROGRAMMING page shows.
-
The PROGRAMMING MENUS indicationshows in cyan.
-
The '<' mark adds to the < PROGRAMMING MENUS indication.
-
The AIDS DMU PROGRAMMING page shows.
R 1EFF : 151-199, 201-210, 1 31-36-00Page 241 1 1 May 01/05 1 1 1CES 1
INTENTIONALLY BLANK
R 1 1
31-36-00Page 242
1 1 May 01/05 1 1 1CES 1
R Subtask 31-36-00-740-063-A
R B. Programmable Report Inhibit
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R On the MCDU: On the MCDU display:
R - Push the line select key adjacent - The AIDS PRINT REPORT page shows.
R to the < PRINT REPORT indication.
R - Push the line select key adjacent - The AIDS REPORT INHIBIT page shows.
R to the < REP INHIBIT indication.
R - Push the line select key adjacent - If the generation function is set the
R to the * YES GENERATE or GENERATE line shows YES GENERATE NO *.
R NO * indication to set the - If the generation function is not set
R generation function. the line shows * YES GENERATE NO.
R - Push the line select key adjacent - If the store function is set the line
R to the * YES STORE or STORE NO * shows YES STORE NO *.
R indication to set the STORE - If the store function is not set the
R function. line shows * YES STORE NO.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 4(2)
