NOTE : When there are several valid trigger conditions, the minor
____ triggered code has priority and is the only one printed on the report thus:
-The values of the report lines CE, E1, S3 and S2/T2 have to be crosschecked with the AMM 05-51-11.
The list that follows shows the trigger codes and the event that causes the print-out of the load report during a hard/overweight landing:
-4100: Excessive Radio Altitude Rate (RALR)
-4400: Excessive Body Normal Acceleration (VRTA) (compared to the limit at landing) - during +/- 0.5 seconds before and after landing
-4500: Excessive Body Normal Acceleration (VRTA) (compared to the limit at landing with bounce) - during +/- 0.5 seconds at landing (VRTA > VRTAL1.2) or at bounce (VRTA > VRTAL1.3)
-4800: Excessive Gross Weight (GW) (compared to Radio Altitude Rate (RALR) - at dataset time at landing
-4900: Excessive Gross Weight (GW) - compared to Body Normal Acceleration (VRTA) - during +/- 0.5 seconds before and after landing.
(2)
For additional information refer to (Ref. TASK 05-51-11-200-004) and to the description of the load reports (Ref. AMM 31-37-51 P.Block 001).
(3)
If you are not sure that the load report values are correct do a download of the DFDR data (Ref. TASK 31-33-00-710-009) and a DFDR data analysis to confirm the values.
Subtask 31-37-00-210-051
B. Check of the Load Report Parameter after Excessive Turbulence
(1) Do a check of the report lines CE, E1, S2/T2, EC and EE.
**ON A/C 201-202,
(Ref. Fig. 201/TASK 31-37-00-991-001)
R **ON A/C 001-049, 051-099, 101-149, 151-199, 203-299, 301-399, 401-499,
Post SB 31-1111 For A/C 001-003,
Post SB 31-1122 For A/C 051-054,
(Ref. Fig. 201A/TASK 31-37-00-991-001-A)
**ON A/C 201-202,
(Ref. Fig. 202/TASK 31-37-00-991-002)
1EFF : ALL 1 31-37-00Page 209 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 203-299, 301-399, 401-499,
Post SB 31-1111 For A/C 001-003,
Post SB 31-1122 For A/C 051-054,
(Ref. Fig. 202A/TASK 31-37-00-991-002-A)
**ON A/C ALL
Post SB 31-1111 For A/C 001-003,
Post SB 31-1122 For A/C 051-054,
NOTE : When there are several valid trigger conditions, the minor
____ triggered code has priority and is the only one printed on the report thus:
-The values of the report lines CE, E1 and S2/T2 have to be crosschecked with the AMM 05-51-17.
The list that follows shows the trigger codes and the event that causes the print-out of the load report after excessive turbulence:
-5100: Excessive Body Normal Acceleration (VRTA) - compared to the positive limit, flap in clean configration
-5200: Excessive Body Normal Acceleration (VRTA) - compared to the negative limit, flap in clean configuration
-5300: Excessive Body Normal Acceleration (VTRA) - compared to the positive or negative limit with extended flaps.
(2)
For additional information refer to (Ref. TASK 05-51-17-200-001) and to the description of the load reports (Ref. AMM 31-37-51 P.Block 001).
(3)
If you are not sure that the load report parameters are correct do a download of the DFDR data (Ref. TASK 31-33-00-710-009) and a DFDR data analysis to confirm the parameters.
Subtask 31-37-00-800-050
C. Complementary Information
The list that follows shows the trigger codes, the parameter and their standard values:
-5100, 5200, 5300: FLAP (FLAP position: from 0.00 to 40.00 deg.)
-
4800, 4900: GW (gross weight: from 0 to 8000 multiply by 10 kg)
-
4800, 4900: GWL (standard value at 73500 kg)
-4100, 4800: RALR (radio altitude rate (vertical Speed): from -99.9 to
99.9 ft/sec. - negative value indicated by 'N' on the first digit)
-4100: RALRL (standard value at -9 ft/sec.)
-4800: RALRLG (standard value at -6 ft/sec.)
1EFF : ALL 1 31-37-00Page 210 1 1 Aug 01/05 1 1 1CES 1
-4400, 4500, 5100, 5200, 5300: VRTA (normal acceleration: from -3.00 to
6.00 g - negative value indicated by 'N' on the first digit)
-4900: VRTALG (standard value at 1.7 g)
-4400: VRTAL1.1 (standard value at 2.6 g)
-
4500: VRTAL1.2 (standard value at 2.6 g)
-
4500: VRTAL1.3 (standard value at 2.6 g)
-5100: VRTAL2.1 (standard value at 2.5 g)
-5200: VRTAL2.2 (standard value at -1.0 g)
-5300: VRTAL2.3 (standard value at 2.0 g)
-5400: VRTAL2.4 (standard value at 0.0 g).
1EFF : ALL 1 31-37-00Page 211 1 1 May 01/04 1 1 1CES 1
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 4(107)
